lever-lok all loose

[_TheGrimReeper_]

hi! I just got my g7(its used) and it didnt come with a manual. And the stupid pdf format manual isnt working for me either. The lever-lok on the back is loose when it is all the way closed... like it can move up and down really easy when its closed. Is it sopposed to be like this? How can i fix that? and how do i change the pressure of the reg (in other words velocity). And can anyone explain to me how to get my gun out of demo mode and to psp or semi auto or somthing?
-thanks

[LifeWithAnAngel]

Well to get that breech release lever more tight, move the lever all the way to the unlocked position and take out the tiny set screw that holds the lever on to the back plate, and put a tiny o-ring or a IR3 breach o-ring on to the base of your lever stem, then put the lever back on and it should be nice and tight. Oh and how you change the pressure of the reg (in other words velocity) on your gun just simply adjust the adjusting screw on the lower portion of the front grip with a 3.0mm A/F Allen key (Clockwise to decrease velocity and anti-clockwise for to increase.) And to get your gun out of demo mode, you have to take the left grip panel off, turn the gun on and put it on safe mode and adjust your modes by pressing the small yellow button until you get to where it says demo mode and then press the small blue button to get to another mode. (mode 1 is semi mode.) Sorry i cant explain real well. Hope this helps. Oh and by the way there sould be a thread about this somewhere.

[uniquenewyork15]

yeah for the breach lever. just make sure the screw is in, b/c from what it sounds like, you dont even have a screw in there. if you do just make sure its tighttened.

[Trigga Nometry]

Check out this thread: http://www.angel-owners.com/showthread.php?t=48332

[MORFEUS]

Is it also possible to replace the G7 lever with a Speed 06 lever?

[hgroberts]

Maby, but not likely

[_TheGrimReeper_]

Thanks for the link and the info you all posted, whats the diff between a speed 06 lever and a g7's one? And im trying to keep all my questions in one thread so...(i finally got the manual to work but it doesnt tell me this:( ), how do i take off the breach? Cause i really want to trade it to somebody for a red one.

[warpedx]

The G7 lever is an actual lever, which goes and covers the switch when it is in the closed position. The 06 Speed uses more of a knob than a lever. It does not reach over to cover the switch.

[_TheGrimReeper_]

yea, lol, right when i posted that i looked in the 06 speed picture thread and saw that.