Max-flow

[willysan]

I've got some questions, I have a Max-flo manifold, and i'm wondering what would be a good setup for it. I have it set at 450 psi, which i'm think is optimal, however i want to get more out of it, i want to setup my marker to run lower pressurer, like any ideas of i need to adjust the dwell, etc, any ideas, thoughts.


In case anyone is wondering, I have a 05 speed, with a wdp volumizer, and no other upgrades.

[toddly24]

My LP maxflo ran my angel at 170 psi. I don't know if it was shooting up to a correct velocity though, I didn't have a chrono handy, however it looked like it was shooting hard enough.

[iceman2ice]

mine tank is set at 270 psi output... i'm using an A.I.R. though.

try to get a cobra bolt... i shoot 280 with my soft face and when i replace my bolt with the cobra, my chrono spiked to 310! so i need even lower my reg.

saves a lot of air!

[willysan]

any suggestions on the setting of the lpr, like how high should i set the PSI?

[thog94]

Here is the Speed set up thread, take a look at what other people are running at, try a setting or 2 and see what works best for you:
http://angel-owners.com/showthread.php?t=42342