Need some help

[Kris1187]

i jsut ordered a new sight rail and asa and id like ot put them on my gun, but i took the screws out of the sight rail and it wotn budge i cant get it off i tried to search didnt come up with any thign and the manual isnt to helpful. i also do not kno how to take the old vertical adapter off of my reg and gun so i can put on my new asa any help will be grea thank you.

[C.Carles-AOG]

Sight rail = paint around it.
ASA, try taking a pic. There is an allen screw in there holding it up from what I recall.

[Kris1187]

i took the allen screw out fo the asa allready that doesnt do anythign and i dont see any paint aroudn the sight rail any ideas to get paint out maybe there is some that i cant see

[y0rascal]

k for the site rail do what i use to do carefully get the small allen key stick it in the hole and pop the sucker out thats it watch out cause it might fly out and clean it good and put on now site rail that easy might also be cause when it was anodized the paint could of hardened together also.....



and asa whe pulled out and going to put the pin back in push the lpr in and slip it in the hole exactly how it comes out goes in kinda hard to explain but you should get it.....

[WarpedKid02]

If you still can't get the Site Rail off, unscrew your breech know. Then unscrew your backplate, there is a spring under the back plate so carefully remove it. Take the small allen key, and push the site rail out.

[Kris1187]

okt ahnks a lot guys for the info on teh site rail im going to ryit now any ideas on the asa

[dowmace]

the asa you should just pull on the sucker I can't think of any other way to get it off

[Kris1187]

thanks for teh hel warped it looks real nice iwht the new asa on it thanks for all the help guys