ROOSTER
01-17-2006, 11:03 AM
Ok this has been bothering me for sometime, and I can't find a staight anwser. The manual says to check or adjust the lprthe pressure needs to be at 350psi at the second stage regulator. Does this mean 350 output from the tank into the second stage reg? Or does this mean 350 output from the second stage reg into the angel? If anyone could clarify this for me that would be great. I set mine up the way I described first. My lpr is at 50psi while shooting 290 fps with 350psi going into the second stage reg. When I tried it the other way my lrp would go down alot once I dropped the opperating pressure from the second stage reg back around 220ish to chrono the gun at about 290 fps. I would just like to know what is the correct way.