getting shootdown

[camebacktoangels1]

dwell 10
lpr stock
inline maxflow set to 400

ok... if i shoot under 2 or 3 bps i can get solid consistant shots... as soon as i start adding some speed to the gun... balls just roll out the front of my barrel....

please help

[Devs]

dismantle your HPR and LPR. clean them up, re-grease them and reassemble.
see if that helps.

[warpedx]

What tank are you using and how is it attached to the marker? If it's an on/off, try screwing the valve in more or less.

[angelballer4life]

when i first got mine, i used my friends tank and the reg on it was bad, so i also got shootdown,

make sure the output of the reg on your tank is what you think it is

[Devs]

What tank are you using and how is it attached to the marker? If it's an on/off, try screwing the valve in more or less.

Good point warped, I forgot about this. I had this problem back when I had my A4. My Check it Uni cap wasn't depressing the pin valve on my tank all the way. I put a angel minireg spring/washer dealie under the cap and that solved my problem.