Solenoid(14-way) Leak help ASAP

[23027]

Hey I have a phat leak comming from the solenoid.. it used to be a little leak but I took it apart and put it back together and now it's §§§§ing huge.. Somebody please help i'm paintballing tomorrow and this is crucial.. Thanks

Jeff

[macrader1]

did u tighten down the black plate with the screw in the center of it down all the way? did u make sure u put all the gaskets back in the right way? did u accidently loose ne of the seals in the noid when u took it apart?

[23027]

I wouldn't have this problem if I knew what was missing.. with the backplate on its still like that, and I'm pretty sure it's all put together fine but i'm going to rebuild it again to be safe.

[23027]

ok now I fixed the leak.. it's fine except that when I gas it up and shoot, it won't shoot or fire or actuate or anything it just makes the click sound like as if you were shooting without air..help?

[thog94]

Sounds like you put a gasket in backwards or you plugged your noid into the wrong connection in the board.

[23027]

are you talking about the leak I had before or the problem I have now about it not shooting

[thog94]

The problem that you have now.

[23027]

like it will gass up and be normal.. but then I try to shoot and the 14-way does it's little click thing.. and then the leak gets bigger and bigger

[23027]

oh once I took the 14 way apart and greased it up with patrolium jelly.. it's kind of see through white I greased the manifold gasket, valve manifold, the little bolt thing inside the 14-way, etc. just the stuff by the 14-way.. maybe this has something to do with it? Not sure..

[macrader1]

ive got a video of how to clean ur noid, let me check and see if i still have it. ill get back to u.

[macrader1]

found it!!!! sorry pics are a lil blurry. and its a tad bit hard to read. but here it is:
http://media.putfile.com/How-to-clean-your-noid

[23027]

well it did help a little now when I screw in the tank it's just a big steady leak. HEEELP

[Kermit Da Frog]

Try and avoid using patrolium jelly on your marker. It may cause swelling of some rubber materials. It could cause you more problems down the road if that stuff gets cycled into your noid...

[23027]

ok thanks for the tip.. any idea how to stop that leak though?

[macrader1]

where is it comming from? EXACTLY. did u tighten the black piece on top of the noid?

[23027]

yes I did tighten that black piece that goes onto the top of the noid. The leak is comming exactly from the 14-way.

[macrader1]

possibly a bad gasket, or even a missing gasket from when u took it apart.

[23027]

well i'm sure I have all the gaskets in their right place.. there's the manifold gasket, one thats like inside the 14-way, and then one on top of the black thing above the manifold gasket. Can't remember the names but I think you'll know what i'm saying.

[macrader1]

well the possible a bad one.

[buddha554]

Im Having Same Problem I Just Replaced The Bottom Gasket That Seals The Body And The Noid And It Still Leaks. I Think Its A Bad Spool.hope Im Wrong Ill Try More Tests Tommorow And Get Back To You Sleepy