Hhheeeeelllpppp

[donie_089]

ok guys any help would be greatly apprecieted.. im an angel noob this is my first ever...i just got an 06 angel seed yesterday. i read the manuel and then tried to set it up...first i adjusted the MROF to 21. then i adjusted the hopper/eye settings to the 4th one(force fed fast) then i did a couple other things, ithink, kinda forgot long night. Next i tried adjusting the trigger, first i adjusted the furthest most screw and made the trigger really loose, then i did soemthing with the back one, didnt do much, then i tried getting the trigger acuation point twords the front of the trigger pull by turning the screw in the trigger clockwise. did this untill it wouldnt go anymore, and it really didnt seem to make a diff. then i roated the wheel a little, and then messed with the acuation point a little more...now for some reason the guns soilnoid will only trip when the trigger is released. so the gun shoots one shot each time the trigger is released....this doesnt make sense, no matter where i twist the acuation screw it doesnt move the shooting point in the trigger pull. and if i try to adjust all of the other screws the gun wont even cycle at all most of the time...on top of this problem the guns eyes dont work properly now! wtf...every time i turn the gun on the eyes are on, i can see them in the breach, but then ill stick my finger in the breach and the gun wont detect a ball or anything...then i pull the trigger once and there will be a light on each side of the 2 yellow ones, and then about 15 secs later the guns eyes will turn off, or if i stick my finger in the breach after the trigger is pulled to gun will fire 2 times really quick and then the eyes will turn off. i tried putting the setting back to defult but this doesnt even work. PLEASE HELP ME!!!! the thing is brand new and should be working fine!!!
thank you

[BoB]

Set the trigger wheels back to factory zero and back the toe screw out until the plate is flush against the trigger. Once you are back to zero try to re-adjust from there. Let us know how it works out.

[donie_089]

where is factory 0 and which one is the toe screw?

[firemedic30]

The toe is in the trigger.

0 would be in the middle, where movement of the wheel does not allow the trigger to rock forward or backward. I think there is a little notch to indicate that.

[donie_089]

ok with the top trigger screws i can get the guns eyes to actually see my finger going in the chamber, but this only lasts for about 20 secs then the eyes turn off...and when i get the eyes to work the gun wont cycle, so its like one or the other, dont know