PDA

View Full Version : holes on my lcd?

dowmace
03-04-2003, 07:53 PM
What are those little holes on the front and back of my lcd there is one right behind the grip frame and one in front of the mini reg anybody know what their for?
SkeL
03-04-2003, 07:55 PM
I know the one on the mini reg is for the adjustment screw. I'm not sure about the one just behind the rear most frame screw. IS it for a snatch grip?
dowmace
03-04-2003, 07:57 PM
adjustment screw?
SkeL
03-04-2003, 08:07 PM
For your input pressure. You know, so you can adjust your velocity......... If you don't get what I'm saying, try screwing it in all the way. It will poke out the other side. At least, I think that's the hole you speak of. :puzzled:
Syentific
03-04-2003, 08:07 PM
I am shooting in the dark here ... with a blindfold ... and with my head in a thick paper bag ... you get the point:lost:

I wonder if they arent some sorta index point(s) WDP uses for a milling jig?:doh:
2k1DarkLCD
03-04-2003, 08:30 PM
The one on the back of the grip, are you talking about the place, where you insert the charger, to charge your battery.......

Or are you talking about the hole where no screw goes, on the grip frame..... it's just an open hole.....

And only hole on the mini reg I can think of is the velocity adjustment screw.........
bunghole
03-04-2003, 08:36 PM
He's talking about the non-threaded holes on the bottom of the body at the rear and the front. Syentific probably has it right about it being mounting points for milling.
crashdan
03-04-2003, 10:51 PM
the back one is for a fang grip of some kinda and im not sure what the front is for, but the front one is in front of teh vertical reg adapter, underneath where the volumizers/lpr,etc are
IanR
03-04-2003, 10:55 PM
People he is talking about the non threaded holes right behind the grip frame and in front of the asa/reg.

They are put there for milling purposes like syentific said.
dowmace
03-05-2003, 04:57 PM
thanks for clearing that up for me bunghole
WarpedKid02
03-05-2003, 05:11 PM
Originally posted by crashdan
the back one is for a fang grip of some kinda and im not sure what the front is for, but the front one is in front of teh vertical reg adapter, underneath where the volumizers/lpr,etc are

The whole behind the trigger frame is not for the fang grip. The fang grip screws on the the rear trigger frame screw.
crashdan
03-05-2003, 10:43 PM
wasnt sure, i thought it might have, but thanx for tellin me warped