LCD Display problem

[Hotscoots]

When I turn the gun on, the screen stops at 888 8888
Will not go to Safe mode ....Also , while charging, I'm hearing a grinding motor sound ...Shot perfectly 2 days ago and now this .
Does anyone have any idea whats wrong?

thx, Dean

[Emmit]

that grinding sound is probably your vibes motor, sounds like your board is bad

[Hotscoots]

Thanks Emmit .....Do you know where and how I can do a board swap ? I live in NY ........Dean

[Emmit]

in NY.....consider either Ken Crane at Performanceangel.com or Impact at impactpaintball.com those are probably the 2 closest

[crashdan]

this happened to me once, well, minus the motor sound, it could be the trigger still pushing on the micro switch, every once in a while i had this same thing happen to me, it was just the trigger sitting on the switch, but i have since put the return spring back in and problem solved.... so before you send it off, try taking off your trigger frame and adjusting the screws...later

[2k1DarkLCD]

Yeah, before getting a board swap and spending 20$, play around with it...... But I don't think if you hold the trigger in.....it stays at the 888 888 888 screen.....But check it out first anyways.......Adjust your trigger around, and stuff...... If this doesn't work..... You will need to contact www.angelparts.com and ask about a board swap.....You will need to send your board in and pay around 20$ for a brand new board........Great deal, gotta love our sponsors.....