speed 06 mrof settingz

[novadude1133]

ok I just tried to change the stock setting from 15 to 30 and this is how I did it, i pressed the botton inside the grip till it changed from red, orange and then green and then I pulled the trigger til all were green and then turned off. is this the right way to do it??

[Devs]

read your manual
check page 8

[Airmack]

Yes but, I believe MROF is all lights flashing.

[novadude1133]

oo snap, so itz not the top light go from red-orange-green and then from the bottom geeen all the way up?? and if thatz not the way, what did that do?

[Devs]

Put your gun down and walk away. Find your manual and sit down. Read it. Trust me, you'll no longer need to ask these questions once you've read your manual.

Again, its on PAGE 8

[novadude1133]

read it and just wanna know if im correct it is the green setting right not the all flashing leds at the top

[Devs]

from the MANUAL!!!!
Page 8
"Scroll through the menu until the Top LED flashes red...orange...green. With just one of the smaller LEDs illuminated the MROF with eyes on will be 15bps. each additional small LED that becomes illuminated indicates that the MROF with eyes on will be increased by 3bps - up to a maximum of 30bps (indicated by all LEDs illuminated)."

Green top LED is dwell, flashes red is TR 1-5 and PSP, and flashes orage is hopper type.

see, actually reading the manual answers questions.

[novadude1133]

some reason when I try to change the setting on the mrof is wont do anything can somone help me?

[ishmaleraper]

take your medication maybe thatll help you understand the simple logic of the speed board....:stooges:

[novadude1133]

well the funny thing is I never had a angel speed before and the manual doesnt really tell you wat to do to change the mrof other then going thew the menu and slecting all the flashing lightz, so I wazz just kinda wantin to know how do make it change from 15 to 30..

[Devs]

holy crap kid
Push the button on the board until the Bigger Top LED cycles through red-orange-green constantly. pull and release the trigger until all the LEDs are lit up. If it won't let you change it, that means you are in PSP mode. If you're in PSP mode, push the button until the Bigger Top LED flashes red. Pull and release the trigger to any setting of 1-5 (from the bottom) leds. All LEDs lit is PSP. You can't have 30bps under PSP. So once its 1-5, Push the button on the board until the Bigger Top LED cycles through red-orange-green constantly. pull and release the trigger until all the LEDs are lit up.

Like I have said a couple times. This is covered in detail in the manual. When I told you to read it, I didn't mean to just look at the pictures.

*edit* it doesn't matter if you've owned a speed before. They are THE EASIEST gun to set up. But then again, had you actually read the entire manual, you'd like that by now. :stooges:

[novadude1133]

ok thx, do you know how to take out the air tube from the reg?

[angel2k]

Seriously, sit it down, and walk away.

[novadude1133]

lol

[warpedx]

from the MANUAL!!!!
Page 8
"Scroll through the menu until the Top LED flashes red...orange...green. With just one of the smaller LEDs illuminated the MROF with eyes on will be 15bps. each additional small LED that becomes illuminated indicates that the MROF with eyes on will be increased by 3bps - up to a maximum of 30bps (indicated by all LEDs illuminated)."

Green top LED is dwell, flashes red is TR 1-5 and PSP, and flashes orage is hopper type.

see, actually reading the manual answers questions.
Hmm, I believe this answers the question I had on the 05 Speed software also. That detail wasn't in the 05 manual. Thanks!

[novadude1133]

thank you..

[xxmjumpman23xx]

ok thx, do you know how to take out the air tube from the reg?

Take out the air tube from the reg?!?!?! WHAT THE §§§§?

LOL kid is htis ure first gun, mayb u should have started out w/ something more your skill level, like a tippmann or spyder haha

[novadude1133]

nope not my first, i got a shocktech timmy and a tippmann a5..........................................

[xxmjumpman23xx]

nope not my first, i got a shocktech timmy and a tippmann a5..........................................

well then what the hell do u mean "take out the air tube fr/ the reg" and why cant u find out how to work a simple 05 speed, w/e doesnt matter just visit this forum a lot, your knowledge of paintball markers will rise greatly.

[novadude1133]

I couldnt think of what it waz called so I called it the airtube lol, and just to tell you I never had to take out a microline so yeah I wouldnt know..

[Devs]

warpedx - yeah, that wasn't in the original 05 manual because PSP was added later on. glad i could help.

Nova - do you mean the cartridge from the reg? if so, don't touch it. Leave it there. Since you seem to fail at reading a manual, all we'll allow you to do is put a tank and hopper on the gun. Nothing else. lol

[novadude1133]

lol, thatz not cool

[Devs]

lol, well its certainly cooler than you messing up your gun beyond repair. Isn't it. :wall:

[novadude1133]

what I ment walla go waz how do take out the microline out from the bottom of the reg, not to take out the cartage... although thx for the help on the mrof settingz..

[Devs]

what I ment walla go waz
WTF?

As far as the macro fitting. Take off the bottom part of the fore grip (part the macro fitting is threaded into). If you look, the macro fitting itself has a hex slot in it. As does the part the macro fitting is threaded into. The part needs a REALLY big allen wrench. use the two proper allen wrenches and turn them in opposite directions, and the air fitting will come off.

[novadude1133]

dude I never wanted to take out the bottom of the grip just that little little tube that comez from the asa to the reg... and I already did it so yeah

[Devs]

well, considering none of us understand what it is you're asking, its hard for us to help.

English lessons are always a plus. ;)

[Airmack]

Wow, I guess not all of us have common sense around here... :notsure:

[bonusballer101]

hey kid with the problems it would help alot if u know how to read but if not have ur mommy explain it to u ok