How do i set my mini reg to 250 psi?

[Hollywood*]

Yes it sounds very very noobish, but when you dont have a reg that you can screw onto a gun with a gaugue how do you tell? i was told by Mark Costa to set my Arsenal to 250 psi out of the mini reg and set my LPR to 60 PSI. Problem being how can i tell the output of my reg?

Also i have a scion for an air system, does anyone have any ideas.

And no i dont want to bypass the reg.

[Devs]

What you can do (if you figure out a way to keep the valve closed) you can just put the Gauge from the Angel Tool Kit on the other side. That will tell you operating pressure.

[Trigga Nometry]

You can do it using something like what I did here: http://www.angel-owners.com/showpost.php?p=389457&postcount=39

Some people just use a piece of macroline over the valve stem to hold it in place. You just have to cut it to length.

[Devs]

wow trigga. Thats awesome. I have a totally ghetto gauge due to my dumb ass losing my real one. but thats pretty sweet

[Trigga Nometry]

Thanks Devs.

I also made a bunch of these a while back to hold the stem in place and they also allow you to use a volumizer (not that you need it with a G7). They worked great.

I haven't had time to make any more though.

http://img.photobucket.com/albums/v154/TriggaNometry/Phallanx/100_0738.jpg

http://img.photobucket.com/albums/v154/TriggaNometry/Phallanx/100_0736.jpg