PDA

View Full Version : Where should I send my LCD to be serviced?

mramseyISU
03-01-2003, 04:47 PM
I'm having a lot of velocity trouble with my LCD and I'm looking for a good place to send it. Don't tell me to send it to TAG because the problems started after I got it back from him. I'd like to know someplace else to send it. I've reshimed it, cleaned and re-lubed the mini reg and replaced the valve stem. Now The valve stem is leaking and I'm tired of messing with it. Who's a good person to send it to that won't charge me an arm and a leg?
Moo Juice
03-01-2003, 04:48 PM
try out the sponsers
Ekim
03-01-2003, 04:54 PM
Look at www.angelparts.com. I got my tuned there. They did a Great job!
IanR
03-01-2003, 06:11 PM
Where do you live?

www.angelparts.com (Indiana)
www.impactpaintball.com (New Jersey)
www.preformanceangel.com (Massachusets)
www.mospaintballshop.com (Flordia)

Pick the one closest to you..all are great
Emmit
03-01-2003, 07:06 PM
I'm going to assume the "ISU" part of your name refers to a school, and since that really narrows down where you'd be. I'd sent it to Angelparts.com, they are located in Ft. Wayne and Sean and Eric do an excellent job. I believe they are both at Skyball right now, so you'll have to wait til next week to get a response from them, but you can still browse their site listed by IanR and check out their prices. They are pretty quick with their turn around times as well.
mramseyISU
03-01-2003, 08:52 PM
I live in Iowa accually. I was thinking about sending it to warped, but I was reading up on their warranty stuff when I had a dark and they won't let you even buy their warranty on a dye angel (which this happens to be) so I'm guessing they don't want to work on them and if they did I'd get reamed, so I think I'll send it to angelparts.com First I'm going to put a spares kit into it tomorrow and see if that does anything for it.
Emmit
03-01-2003, 09:30 PM
Warped is good, but since the Angel you want serviced isn't a Dark, and as you said you can't purchase the aftermarket warranty on it, you're going to pay Warped's prices on labor. If you read their site, their labor charge is like $50/hour. I would seriously consider Angelparts.com as you've said. You'll save on shipping, and Sean and Eric will do you right.
DyeBoomer
03-01-2003, 11:07 PM
Whatever you do, do NOT send it to The Angel Guy. He is a piece of ****. I sent my gun there for the Gold Service, came back with the EXACT same problem, so I took it apart and it was still dirty. Cleaning was supposed to be included with the gold service. So send it to one of the sponsors.
mramseyISU
03-02-2003, 01:36 AM
Originally posted by DyeBoomer
Whatever you do, do NOT send it to The Angel Guy. He is a piece of ****. I sent my gun there for the Gold Service, came back with the EXACT same problem, so I took it apart and it was still dirty. Cleaning was supposed to be included with the gold service. So send it to one of the sponsors.
Too late there big guy, that's why I'm asking who I should send it to. It came back in worse shape than when I sent it out accually.
2k1DarkLCD
03-02-2003, 06:33 PM
Send it in to www.buypb.com ..... Chad Fuller is the angel tech there, "Maker of the Adrenalin Angel LCD"......He does all my work, and he is a master of the angel. One of the best tech's in the nation........ Go on the site and check his email, or the site's email......they respond quickly, and I think labor charge is only 20$ an hour
HollyWood24
03-03-2003, 06:53 AM
Thankz a lot of everyone. I know this wasn't my topic, but it helped out a bunch. I had mine boxed and ready to go to TheAngelGuy.com since they live 2hrs north of me. I've decided to send it to angelparts.com Their a lil more expensive, but I can guess I can deal with it if they do the job.


-Anthony
SkeL
03-03-2003, 02:04 PM
I sent my gun into angelparts.com and couldn't be happier with the change in performance. Just be careful anywhere you send it, tell them to go easy on your gun. Some techs have a problem with being gentle with your marker....
mook
03-04-2003, 10:39 AM
Originally posted by DyeBoomer
Whatever you do, do NOT send it to The Angel Guy. He is a piece of ****. I sent my gun there for the Gold Service, came back with the EXACT same problem, so I took it apart and it was still dirty. Cleaning was supposed to be included with the gold service. So send it to one of the sponsors.

i watch my dad put guns in the parts washer all day. it seems funny that your gun was missed. maybe you saw the grease he put back in the gun after it was washed? you can aslo send the gun back if you are not happy because they give the ups number out for return shipping. it will not cost you anything to have the gun looked at again if you are not happy. when i looked at your website i did not see any of those names on my dads computer. what name did you send it under and i will have him look it up and give you a call.

bye
DyeBoomer
03-04-2003, 12:53 PM
What do you mean? The name I sent the gun into? Anyway, I have the return papers and stuff if that will give you so info, talk to me on AIM my sn is dyeboomer.
mramseyISU
03-04-2003, 04:43 PM
I've been in contact with TAG since I posted this and he's been very helpful so I'm going to give him another chance. The guy supports college paintball and I try to give my money to companies that do that.
Emmit
03-04-2003, 05:19 PM
Originally posted by mramseyISU
I've been in contact with TAG since I posted this and he's been very helpful so I'm going to give him another chance. The guy supports college paintball and I try to give my money to companies that do that.

sorry....fool me once, my bad, fool me twice I'm stupid.....

just my opinion on that.......