Speed06 problems already....

[MarcSchulte]

i just got my 06, got it out of the box, adjusted trigger, then when i went in to adjust eye settings, for some reason my internal settings button dosent work, it wont depress, it is like there is no spring in it, if you flip it up side down it moves out, so some how my buttons doesnt work and this really sucks cuz it shoots to slow, can some one help me out or direct me to some one to get this thing fixed........

[xxmjumpman23xx]

i just got my 06, got it out of the box, adjusted trigger, then when i went in to adjust eye settings, for some reason my internal settings button dosent work, it wont depress, it is like there is no spring in it, if you flip it up side down it moves out, so some how my buttons doesnt work and this really sucks cuz it shoots to slow, can some one help me out or direct me to some one to get this thing fixed........

Any of the MT's (links on the upper right) can help you out, always buy your guns from an MT for the angel force lifetime warranty!

[MarcSchulte]

my 06 was purchased directly from wdp in california

[warpedx]

You should still be under factory warranty. Contact one of the Master Techs (links at the top of the page or at www.angelforce.tv) and they should be able to help you out.

[MarcSchulte]

wow 06speeds are junk, i cant even adjsut my settings, My ego is british made and it dosent suck. why is that my angel is slow, i also hope it kicks less when there is paint in it cuz it kicks alot worse than my dm5

[Devs]

if I remember correctly, MROF is set to 15 out of the box.
I haven't had any problems with my 06. Just get in contact with one of the MTs. they'll help you out.

[FATBACK]

wow 06speeds are junk, i cant even adjsut my settings, My ego is british made and it dosent suck. why is that my angel is slow, i also hope it kicks less when there is paint in it cuz it kicks alot worse than my dm5

Maybe angels are'nt for you then.......sell it and be happy with your other guns:patriot:

[xxmjumpman23xx]

wow 06speeds are junk, i cant even adjsut my settings, My ego is british made and it dosent suck. why is that my angel is slow, i also hope it kicks less when there is paint in it cuz it kicks alot worse than my dm5

If you have no patience and no understanding for the capabilities of your gun then stick with something else, don't leave posts saying 06 speeds are junk when many of us have shot them know they are not, after all this is an Angel forum so spare us the crap and show some patience to get the problem fixed.

[MarcSchulte]

a gun should never come broken from the factory i have order 12 new guns including this angel and this is the only gun that was broke from factory (4 dye guns, 3 sp guns, 2 aka guns, 1 tippmans, 1 spyder, and 1 macdevs

[FATBACK]

Its fate/karma or whatever...you are'nt meant to own a WDP product....

[PaintballStar18]

my angel was sexy from the factory...

[uniquenewyork15]

my angel was sexy from the factory...
yeah me too, i think your just a failure at life, quit. btw 06 speeds are much better than your ego, and did you know that wdp is actually from england....

[October Fly]

Yea, you may call one of those guys referred to as the Master Techs. The word Master implies that they can/will fix your marker. WDP out of Cali?

[firemedic30]

WDP out of Cali?

Right. I believe that they opened up an office at Huntington Beach.

[xxmjumpman23xx]

a gun should never come broken from the factory i have order 12 new guns including this angel and this is the only gun that was broke from factory (4 dye guns, 3 sp guns, 2 aka guns, 1 tippmans, 1 spyder, and 1 macdevs

NOOB

[KEN CRANE]

i just got my 06, got it out of the box, adjusted trigger, then when i went in to adjust eye settings, for some reason my internal settings button dosent work, it wont depress, it is like there is no spring in it, if you flip it up side down it moves out, so some how my buttons doesnt work and this really sucks cuz it shoots to slow, can some one help me out or direct me to some one to get this thing fixed........


ok relax here we will help. sometimes i have seen the button stick but for some info, that button is one of the last things that is pushed ,as after testing the board is reset. now in saying this,take a small philips screwdriver and push the point against the button with a reasonable amount of force and see if you can get it to activate. most always it will free the switch and end your problems. if not contact one of us to exchange the board for you .no questions asked.if you would like to talk to me to help you further just call 508-400-2007 i am on the east coast.

[M4RSH4LL]

unless you bought them new, how could you have orded 2 AKA guns when i thought that AKA went out of business? or am i just stupid?

[MarcSchulte]

just stupid aka is still in around, they jsut dont sell guns anymore due to the horrible gun makers at smart parts DYE 4 LIFE!

[M4RSH4LL]

yah i hate smart parts and im so glad wdp wooped them in that law suit...wdp wooped them both ways...business and in guns cause all ive had with nerves and shockers...they are pretty much blenders in my mind...ive never seen a fine tuned good one last...the regs always have problems and ugh i just dont like em

[xxmjumpman23xx]

yah i hate smart parts and im so glad wdp wooped them in that law suit...wdp wooped them both ways...business and in guns cause all ive had with nerves and shockers...they are pretty much blenders in my mind...ive never seen a fine tuned good one last...the regs always have problems and ugh i just dont like em

Yea not to mention SP guns are ugly as hell

[M4RSH4LL]

haha yah its like SP took a metal tube and like a nail filer and just scratched it a few times, then took a drill and put a few holes here and there for "eyes" and then stuck a handle on it which they ment for it to be modded so you can do that magnent reverse crap and get uber bounce or w/e....also this im pretty sure is false but ive heard a good bti of accounts that smart parts tryed to put a patent or liek gain control of the patent of the wheel...i know that prolly false but its still funny saying that smart parts tryed to put patents on liek everything

[toddly24]

Ouch... now guys, my shocker has only chopped one ball. That's not fair. I still love my angel. Don't shoot me for owning both.

OH, and about your problem, sounds like the button is just stuck. Try what ken said.

[M4RSH4LL]

haha yah i just dont like SP guns....but im guessing you only shot one ball out of your shocker? ahah jkjk but yes i agree with toddly...try what ken said cause ken rules

[toddly24]

haha, funny stuff. But seriously, Ken is amazing.

My shocker is gentle on paint.

[mlinder]

instead of complaining just take the advice or let them replace it for you and not every gun from every company comes perfect and it's not like the body is cracked oon it or something that will cost so just send it to an MT and they will make it right guaranteed

[Chino_98]

Yeah, lol, Smartparts guns arent bad.. but you're totally right my Impulse is UGLY... But that dosent necessarily matter since it performs Really well, once you ditch that crappy stock trigger...

As far as Angels are concerned, im Super Nooby to the Max... and i still managed to figure out the LED's and understand the gun like.... 2 minutes after reading the manual... :evilgrin:

Youd have to be rather impatient, or just un-intelligent in order to not understand the manual... WDP did a Great job, and put alot of effort into making such a Very nicely done manual....
Lol, plus... thats what a manual is there for.. to read, so you know whats going on with your gun ^_^ , how to set it, and how to troubleshoot