PDA

View Full Version : Tadao - 05 speed

diesel_fireman
11-24-2005, 12:48 PM
I know that you can pre-order he board for the 05 speed now. sine it runs on a 9v battery are the boards coming out for the 05 speed going to have a slot for them like the preditor v3 boards? I am sory if this has already been asked, I am new to angels and just bought an 05 speed.

Thanks,
Dan
uniquenewyork15
11-24-2005, 01:02 PM
it will be the same setup as the stock board so yes there will be a slot for one b/c it runs on 9v
shockerdude89
11-24-2005, 05:02 PM
I am also new to angels and have an '05 speed. What is better about the TADAO board than ne other boards for angels. Thanks!
Devs
11-24-2005, 06:53 PM
the biggest thing is that its supported by the MTs. So if something goes wrong, you know you have the best guys in the industry looking after you.
BlackZach76
11-26-2005, 08:38 PM
and it Tadao the best of the best
uniquenewyork15
11-26-2005, 10:22 PM
I am also new to angels and have an '05 speed. What is better about the TADAO board than ne other boards for angels. Thanks!
well it has pretty much any mode of fire you can ask for. legal modes and then awesome illegal to have fun with and light the crap out of something. basically everything you could ask for in aboard. and it has the mt warranty from our awesome mts.
shockerdude89
11-27-2005, 01:42 AM
thanks for the help guys. its been aweosme. Where should i buy the board from. and could i install it or need a tech? thanks!:hititraw: :hititraw: :hititraw: :hititraw:
uniquenewyork15
11-27-2005, 10:22 AM
angelforce.tv
thats the site you get it from. you install it yourself its not hard. you just unplug the solenoid plug, eye ribbon, and hopper plug, unscrew the two screws holding in your board, take out your board, put in the tadao, plug in the plugs, and screw it in, and your good to go.
Studmuffin
11-27-2005, 10:25 AM
angelforce.tv
thats the site you get it from. you install it yourself its not hard. you just unplug the solenoid plug, eye ribbon, and hopper plug, unscrew the two screws holding in your board, take out your board, put in the tadao, plug in the plugs, and screw it in, and your good to go.
It's acctually the wire for the on/off switch not the hopper, but yeah its that easy to install.
uniquenewyork15
11-27-2005, 10:30 AM
thats what i meant cough, cough
crayzspeed
12-01-2005, 08:31 AM
ok now for a speed 05 will the tadao board make use of the LEDS on the back of the speeds triggerframe.. cuz i like playing around with those n watching them light up during the game... if not then ill just get my speed flashed or reprogramed for 20 bucks
Little Matt
12-01-2005, 10:40 AM
cuz i like playing around with those n watching them light up during the game...

HA! Amazing.
Studmuffin
12-01-2005, 10:47 AM
lol no I do not think the lights will be like they were on the stock boards.
Greyfoxxx
12-13-2005, 06:09 PM
What will be different then? Colors? Configurations?:notsure:
Studmuffin
12-13-2005, 11:36 PM
it will be like all of the other tadao boards as far as the lights go...
Squishy OWNS YOU!!
12-14-2005, 04:45 PM
I know that you can pre-order he board for the 05 speed now. sine it runs on a 9v battery are the boards coming out for the 05 speed going to have a slot for them like the preditor v3 boards? I am sory if this has already been asked, I am new to angels and just bought an 05 speed.

Thanks,
Dan
Yes since it is custom made for the 05 Speed.
Greyfoxxx
12-14-2005, 06:09 PM
well... maybe its not sayin much but i also own a 2k2 ECX Timmy (w/ tadao board) and the led is just the same, no different colors or patterns. But i havent really checked around w/ any of the other tadao boards... Hey I've been looking around and maybe its just me but After the first 50 when will tadao start producing mass quantities of these marvelous boards!?!?
Squishy OWNS YOU!!
12-14-2005, 07:18 PM
well... maybe its not sayin much but i also own a 2k2 ECX Timmy (w/ tadao board) and the led is just the same, no different colors or patterns. But i havent really checked around w/ any of the other tadao boards... Hey I've been looking around and maybe its just me but After the first 50 when will tadao start producing mass quantities of these marvelous boards!?!?
200 are being realesed next week and yes, I believe they will be mass producing these because from a business stand point it will only make sense since they are such a good board because I would if I was Tadao.