I need help FAST!

[Moo Juice]

Hi I opend the back of the gun and then a spring flew out. I don't know where it came from and now that part where to hold the breech closes, can be taken out. I was wondering where that spring should go? And I would also like to know why i cant shoot, I got an eclipse and I put the spring in, now i can't shoot. maybe the reason I can't shoot is because I can't turn on my gun. Can you save me the trouble of sending my gun in too a tech. thanks, My gun is a 2k2 silver LCD. Thank you very much, or I would appreciate it if you could let me know who i can talk too about this. And yes I looked throught the manual, Please get back to me asap. Thanks!

[Prophet]

Check and make sure you plugged all the wires into the correct spot on the board, if you need help with this, look at the manual. Once that is done, search for that spring, if you don't find it, I think you could use a pen spring (not sure though).

[WarpedKid02]

On the back of the gun, right above the RAM, there are two little holes. The one on the right is where the breech rod goes in. Once it goes in, then you put the spring in slot next to it.

There are 2 parts above the LCD Display. The one right above the LCD Display is where the 14-way goes. The one that slot, is the intellifeed. A little further up the board there is another slot which is for the battery.

[BlueC&CIR3]

Originally posted by prophet_autarkis
Check and make sure you plugged all the wires into the correct spot on the board, if you need help with this, look at the manual. Once that is done, search for that spring, if you don't find it, I think you could use a pen spring (not sure though).

nah u can't use a pen spring (tried that before). I managed to find that theangelguy had some of them and sold one to me for like a $1.50. I looked through all of AOG sponsers, and couldn't find anything there.

[Moo Juice]

ok, thanks for all the help guys