PDA

View Full Version : Tank Reg. Swap

angelballer4life
11-12-2005, 06:44 PM
I have a Crossfire 70/45 hp and a Crossfire 68/45 lp. I like the peanut size and was wondering if I could swap the regs on them so that the 70/45 would be lp, and the 68/45 would be hp.

What do you guys think?

:cheers:
whitepimp259
11-12-2005, 10:35 PM
100% Possiable
slinkyonrampage
11-16-2005, 02:59 AM
Find someone in your area who is certified, or send it off. It is definately possible.
ArtofWar
11-16-2005, 05:05 PM
What is a max flo Regulator?
tman-89
11-16-2005, 05:12 PM
you can send it back to crossfire to have them switch the regs and put everything back together. they test it too. only $45. I had mine switched at the factory and it has been great.
Vantage_TeS
11-16-2005, 06:37 PM
The regs will be locktited on. I use a wrench on the fill nipple [grab the nipple with an adjustable and use it to lever the reg off] and a padded vice. Remember you will have to relocktite them back on with RED locktite and let it cure at least 24 hours before filling the tanks again.
angelballer4life
11-17-2005, 06:36 AM
Why did you capitalize "red", is there some importance to it? Isn't the type of locktite, not the color?
GMG Force Fly
11-17-2005, 07:37 AM
The different types of loctite are color coded.
slinkyonrampage
11-17-2005, 11:28 AM
And if I am correct the RED loctite is the strongest, and that is definately what you need.
Vantage_TeS
11-17-2005, 05:04 PM
You both are 100% correct.