PDA

View Full Version : G7 Fly ram problem?

mercui2y
11-12-2005, 12:04 PM
I just got my new G7 Fly and i have one problem, I just maybe stupid.
Only has 45 shots, ok here is the problem the ram seems to slide forward.
if the fly is pointed down the ram will slide with the bolt forward.
My old G7 did not do that, is it just cause its new?, if i turn on the air i have no problem its stays in place. Let me know.
FRED-D
11-13-2005, 01:22 AM
hmmmm....do you know how to take it apart? if you do then..check the o-ring on that ram...the reason why you should check it, is be cuz it might be bad... get a screw driver or something that you can stick in there to push that ram all the way back...it should click back.push it hard till it click on its place. if it doesnt, then the o-ring is bad.
mercui2y
11-14-2005, 04:10 PM
Guess just needed to be broken in, now it is fine.

But i have another problem, I am leaking from the Flash tank.
not that bad of a leak but it is leaking slowly. Checked the gaskit and it seems to be fine, anyone have any ideas or tips?
FRED-D
11-15-2005, 07:19 PM
put love juice oil on it.
mercui2y
11-15-2005, 09:15 PM
On the gaskit, i thought you are only suppose to put the angel grease in it.
Trigga Nometry
11-15-2005, 09:20 PM
I just got my new G7 Fly and i have one problem, I just maybe stupid.
Only has 45 shots, ok here is the problem the ram seems to slide forward.
if the fly is pointed down the ram will slide with the bolt forward.
My old G7 did not do that, is it just cause its new?, if i turn on the air i have no problem its stays in place. Let me know.That is really nothing to worry about. Now if it were doing that while aired up or if there was leaking when aired up, then you'd have a problem. The hammer on the ram shaft can just move freely, not a problem at all.