Pictures of G7 intellefeed

[DarkCataclysm]

Can someone take some pictures of their G7 with intellefeed. I was thinking about getting it done to my Arsenal G7.

Could someone list the pros and cons of intellefeed? Please tell any issues related to doing this mod.

Take pictures of the gun with intellefeed not plugged in. Is the hole just drilled into the solonoid cover? Is it a nice clean factory look? Are there any type of plugs to go into it when not using an intellefeed hopper to prevent dirt, mud, water from entering?


Thanks
Dark Cataclysm

[firemedic30]

http://www.angelowners.com/attachment.php?attachmentid=36247&d=1129653502

http://www.angelowners.com/attachment.php?attachmentid=36246&d=1129653389

http://www.angelowners.com/attachment.php?attachmentid=36246&d=1129653389

[firemedic30]

http://www.angelowners.com/attachment.php?attachmentid=36245&d=1129653389

[firemedic30]

Sorry for the second pic in the first post....and it's even an Arsenal!!

JALO!!!!

[firemedic30]

I love this mod!! I have one for my MT Force Fly also.

As far as the pros/cons. Pros are that the hopper spins when you pull the trigger. In theroy and practice, there is a very slight delay with the normal boards. The board has to "wait" to see if there is a ball and THEN fire it. The intellifeed spins when YOU pull the trigger. Another pro, there is a primer button on the face. Just put the balls in and push the primer, it feeds them. Another, when the hopper runs empty (I know, I know, that should never happen LOL) the hopper does not spin. Which is good because there is no sound of an empty hopper spinning to give you away.

Cons, if the wires goes down, there is no hopper. But, keep a back up and then, no prob.

Yes, the holes and wiring are very clean and with Jim, very professional.

GET THE JALO!!!

[lrdbsalt]

thanks nice pics!

[tman-89]

yeah, jalo kicks ass, major ass.

[DarkCataclysm]

Thank you for your great pictures and response firemedic. I am definatly going to get this mod. =)

[NickyD]

really cool gun too...

[Backman]

Ive been thinking about this mod too. I keep hearing it is so much faster than a V board. But I also thought your angel battery gave it juice...? The pic shows batteries in that Halo...so you still need batteries?

[firemedic30]

You still need a battery to spin the hopper. I think that the only "electricty" shared between the hopper and the board is for the activation of the "switch".

I may not be 100% right, but that was what I have come to understand.

Contact Jim from Impact!!

[tman-89]

You still need a battery to spin the hopper. I think that the only "electricty" shared between the hopper and the board is for the activation of the "switch".

I may not be 100% right, but that was what I have come to understand.

Contact Jim from Impact!!

yeah, the only "power," if you even want to call it that (b/c its so little) ,coming from the gun is to activate the spin. the spin itself is powered by the battery. I called jim up before i got the mod done, and he demo'ed the jalo for me. it had a low battery and was going 27 bps. 27 BPS. on a low battery. I havent had a chop with my 4 since i got it (I had the jalo for a while before i got my gun flied)

[limited one]

how fast have u guys with the intellifeed set up been shooting and how does it compare to a stock halo

[crazyAL]

one of my team mates got an actual 31 on his G7 fly with mad bounce of course, the screen reads "xx" when this happens. It's DAMN fast, too fast for tourney. With the intelli the hopper can out feed the angel in theory, making it the fastest hopper known to man, proven lol

[NickyD]

I wish I could see a movie of that...

[Devs]

whats the pricing on having the work done?

[crazyAL]

Hmm, well i know it's something like 80 CY pounds over here, that's with both intelle cables. the loader drilled, a button installed and the marker drilled for the mod. That's about 100 british pounds. You could do it yourself, but it's a delicate job. It should be cheaper in the states though.

Oh and the vid, i'll try post one up sometime soon

[FrankG7]

what's this about a button .... you need to install a button somewhere ? .... so could i use only two batteries with the intelli and it will run good ? ? and also do i only have to remove the top cap and drill it the open my grips ... ? no other gun disasembly after ...?

[WDP Shooter]

one of my team mates got an actual 31 on his G7 fly with mad bounce of course, the screen reads "xx" when this happens. It's DAMN fast, too fast for tourney. With the intelli the hopper can out feed the angel in theory, making it the fastest hopper known to man, proven lol

Crashdan did that as well... maxed his A4 Fly out. it says "XX Balls per second" on the screen, and he has a video of it. I will call him and see if he ever posted it. I know his TR is at 22 and his dwell is like 7. that thing just runs away on its own...

[WDP Shooter]

what's this about a button .... you need to install a button somewhere ? .... so could i use only two batteries with the intelli and it will run good ? ? and also do i only have to remove the top cap and drill it the open my grips ... ? no other gun disasembly after ...?

my intellihalo has 2 Lithium 9v's, the motor, and I added a momentay switch to "prime" the halo. the board is gone, and you will need to drill a small hole to run the wire from the angel board, externally. I have the intelifeed on my A4 fly through where the "A" logo is on the cover. for my G7 Fly, the wire comes out along the grip, temporarily, not too eye pleasing, but it works great.

lok out for the new MT version. You will not have to gut your hopper, and it is a better setup than the earlier intellifeed.

[deepgreen]

Ok, so I'm thinking about intellifeeding my G7 Fly vice buying a boad, but can someone explain to me in layman's terms what I need to buy and do to make it work? And correct me if I am wrong, a stock Halo B will have no problem loading the marker with the intellifeed regardless of the MROF I set?