View Full Version : modes ramping anything
angel4speed
10-20-2005, 05:33 PM
Does it have any modes ramping anything like that and is it the same warrenty as the force lifetime on everything and is tranferable?
angelballer4life
10-21-2005, 11:23 PM
i dont know all about the force warrenty but i found this warrenty for "The Gat", hope this helps
The Gat (http://www.thegat.net/enter/warranty.html)
:cheers:
ATSAR
10-24-2005, 10:01 PM
i hope it has PSP mode... i wouldnt be crazy about putting a brand new board in a brand new gun...
angel4speed
10-25-2005, 02:56 PM
ya but if its off da 06 speed i thought dat gun has evathing preloaded not sure tho thats y im asken
josh_hill
10-26-2005, 12:35 PM
http://angelowners.com/showthread.php?t=48648
The 06 Speed uses the same board that comes in the 05 Speed. The 05 has been coming with the PSP software for some time now.
And The Gat has the same board as the regualr 06 Speed so there.
angel4speed
10-26-2005, 03:12 PM
Ya ppl r sayen that is has psp modes and can be flashed wit otha modes if u want em
The 05 Speeds have come with the PSP mode for sometime now and since the 06 Speed/Gat use the same board they also come with the latest software.
ATSAR
10-27-2005, 05:36 PM
fresh
freakypaint21
11-13-2005, 07:49 PM
soo.......
ishmaleraper
11-14-2005, 12:00 AM
sry i dont know too much bout the 05 boards, question is- can u uncap the psp mode (for §§§§s'n giggles) and is psp the only mode there is or does it have full auto etc.?:notsure:
lordbuttmunch
12-07-2005, 03:18 PM
I have the GAT which uses the 06 board on PSP mode. With the eyes off the max rate of fire is 15 bps, but with the eyes on its like 30 bps. I do not think you can uncap the rate of fire on the stock board, but you can limit the rate of fire (making it slower). Im not sure how this works in PSP mode though as the max rate of fire should be set at 15.4 bps to comply with that format. The 05, 06, and GAT only have semi-auto and PSP modes stock. There are no full auto modes or burst modes.
ishmaleraper
12-07-2005, 11:20 PM
can u use psp and the bounce settings uncapped? i thought u could uncap the bounce settings but i donno bout psp:notsure:
freakypaint21
12-09-2005, 06:26 PM
no the psp is only caped at 15.4 and bounce goes from 15 in increments of 3 to 30
ishmaleraper
12-09-2005, 11:16 PM
k thnx
angelgat00
12-12-2005, 07:10 PM
I also have a question conserning the modes of the gat. how do i get into psp mode? also im not trying to take over the thread i just though that it wouldn't need to make a whole new thread. :notsure:
ishmaleraper
12-12-2005, 09:54 PM
try the manual?
angelgat00
12-13-2005, 03:34 PM
yea its not in the manual i have already checked that out. i need the colors of the led and the meanings and thats not in the manual
ishmaleraper
12-13-2005, 03:45 PM
that sux, maybe try WDP's site hopefully they have something on there bout the 06 speed (06 speed=gat)
lordbuttmunch
12-15-2005, 12:30 AM
Hey, to get to the PSP mode, take the grip cover off exposing the opto board then turn on the gun and let it load. After thats done on the opto board there is one small black button at the middle right hand side. press this button till the top LED light FLASHES RED. This is the bounce/PSP mode selection. One led = No bounce, 3= Kinda bouncy, and 5 = full bounce, and the top LED lit (all 6 LEDs) is PSP mode. Ramping 15.4 after 3 trigger pulls at 5 bps. Thats my fav! Hope that helps.
if you have a light enough trigger job and put it on full bounce, you'll get the same effect as uncapped psp. i did anyways. :evilgrin:
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.