PDA

View Full Version : Trigger pin

ameen
09-30-2005, 12:04 PM
well i need a trigger pin for my 04 speed.

do all angel triger pins fit?



ps. if someone has one can you tell me, because i cant seem to buy just that part alone
firemedic30
09-30-2005, 06:51 PM
Did you try the sponsors??
ameen
09-30-2005, 08:45 PM
Did you try the sponsors??

yeah. they wont let me buy somthing so cheap all by its self and i dont need anything else
firemedic30
09-30-2005, 11:47 PM
That sucks!!
Luc
10-01-2005, 01:27 AM
If its a tiny little simple peice just make it your self. Go to Lowes or home depot and get the right size steel dowel for like $1, then cut it to size.
ameen
10-01-2005, 12:59 PM
i thikn the pin is threaded at one side. i look at the holes in teh grip fram and they are threades, so i dont know.

this is my first angel
newball
10-01-2005, 02:48 PM
No it is not threaded. The threads is for a little screw that makes sure the pin won't fall out.
ameen
10-01-2005, 05:01 PM
ok so i geuss i need that too
newball
10-01-2005, 06:26 PM
It is not 100% nessecary but that way you are sure you won't loose it. I guess any small screw will fit.
Glassjaw
10-02-2005, 11:30 PM
Heh, I adjusted my speed trigger today and I culd have sworn I put in the screw but when I got to see if it's there it isn't. I just put a peice of scotch tape over the whole to keep out dirt and keep the pin in.

As far as the pin itself goes, a dowell would probably work but I would first contact WDP.