gun sometimes doesnt shoot

[SpeedFreak05]

ok so i got my speed 05. at first it was shooting great, but sometimes when i pull the trigger it doesnt shoot .....i turn my gun off then back on and it stilkl doesnt shoot, i repeat the off on thing until it starts shooting but even then sometimes it stops...its says that im clicking the trigger but it doesnt shoot the gun....i know its not my trigger adjustment and im positive its not the eyes coulkd it be the bright light shutdown issue!!!!???

[thatguy!]

What software do you have?

[Koolborderxtrme]

shutdown issue or, try checking this: you turn on your gun, turn the eyes off, start clicking the selenoid and push onto the side of the trigger frame where the battery is. if ur gun stops shooting wen u do this, it is probably cuz ur battery is loose and u need to like tape it down, wedge something between the battery and board or buy a bigger brand of 9v.

[drewbug3]

Same kinda thing happens to me once in a great while, it's the shut down issue...had my gun for like 9 months just now going to get it flashed...its free

[SpeedFreak05]

alright, thanks a lot guys!

[blackstar baller]

if u pay like 25 bucks u get the v7 softwear

[RonnyMcDYO]

Ok so this is that shut down problem? And they just flash the boards and you get the software that fixes this? Cause kens sticky says that the gun actually shuts down and my buddies speed just stops shooting but is still on....tis wierd

[SpeedFreak05]

yea mine just stops shooting but its still on

[El Pirata]

First thing to check for if your speed stops firing is your trigger length. If you have it set to a mouse fart length then board may not be either detecting the trigger pull or the return. While you can still set the trigger exceptionally short, if it is too short and you get any sort of swelling in the vernier wheels from heat, humidity or cold your board can have problems detecting trigger pulls or returns. I will set me trigger a bit on the conservative side, about 1mm before and about 1mm after the activation point and never less, just a thought. Also if you have version 5 or higher it has the bright light shutdown issue fixed.

[RonnyMcDYO]

Im pretty sure its not the trigger its got a pretty big pull on it im not sure if its 1mm on both ends...ill take a look at that again.

[SpeedFreak05]

well like ill go outside and like i know my trigger works fine because like i mess with it inide all the time and i make the solenoid click.. but when i get outside sometimes it just stops shooting but thanks for all of the help guys im gonna get my board flashed to v 7