Intellifeed Reloader B

[mixar]

I have been searching on here and PBN for an hour looking for step by step instructions on how to intellifeed a Reloader B. Does anyone have a link on how to do this and keep the sound activation for priming along with the abilitiy to put it on a different gun and still use it?

[Studmuffin]

http://www.angelowners.com/showthread.php?t=34460&highlight=intellifeed+halo
this will work for your reloader b. look at the last few pages to make sure you get the good relay. i just recently did this to my halo and it works great!

EDIT: the part number to the good relay is #275-240 go to radioshack.com and type it in.

[mixar]

I don't want to bypass the board. I want to set it up so it the hopper can still be used on a different gun.

[rippoff]

you could do it, but it would take some tinkering. You would have to install the relay in parallel with the board, and either put a quick disconnect on the wire, or create somewhere to tuck it when not in use. The diagram here should help you. http://www.angelowners.com/showthread.php?t=36580 But you would have to leave the board and the wires that are stock, and install a second set coming off of the battery, to the relay, and to the gun and motor as shown in the diagram. I could probably do it for you and post pics if you need. Let me know, and I'll get started.