a couple things

[Jake_4997]

i own a angel speed 05's my angel eyes don't light up where as one my friends they light up, and for some reason when i turn on my gun i cant shoot at all, my lights flash like they always do and it shows all the lights on exept for the top one then it shows my top light red and the two middle yellow, my angel eyes sensor works but i can't shoot, not even a click, it also wont let me turn off the eyes, i just got this gun and none of the settings are messed with, im really new at this, and never owned an angel so if you can help that would be awsome, Thanks

[bdpAKAknox]

they dont glow becasue they arnt g7 eyes, most likely.
when the gun is first turned on, the eyes are on, so it wont shoot until its paint in the breech.
you can turn them off by holding the trigger down for a few secs.

Also make sure your trigger is activating the board.

[Jake_4997]

ya the eyes im not worried about cause they work, but the trigger doesn't seem like its activating the board, im new to this hole thing so how would i check to see if its activating and how would i fix it.

[BigP567]

try adjusting the toe adjustment screw in the trigger. same thing happened to mine and it turns out thats wat it was.

[Bigal1]

try adjusting the toe adjustment screw in the trigger. same thing happened to mine and it turns out thats wat it was.


same thing happened with my son's speed right out of the box. wouldn't shoot at all. it was the trigger adjustment.

[Jake_4997]

ya i adjusted it and i still got nothing, while i was adjusting it i was holding my trigger down and i turned my eyes off, but i still couldn't shoot. i turned my gun off and on, and now im back to square one. and other suggestions?

[Bigal1]

so are you saying you tried to adjust the toe adjustment iaw the manual?

[rasta-farri]

just keep messing with the trigger loosen it all the way and take off the grip and see if the pin breaks the beam... just keep changing the trigger or call a MT

[layenxframe]

there is a little peice ebhind your trigger that youy can see if u take ur grip off...that peice is controled by the toe adjustment screw. it pushes it back and forth. you have a magnetic trigeer. when that little metal peice comes incontact with yhe magnetic it relays 2 the solenoid and fires your gun. it only goes back and forth so much. so u have make sure that the wheels above your trigger are withing the toe screws limits. to close and ur gun will not fire because it is constantly in contact with the magnet. to far away and it wont fire becuase it doesnt get close enough 2 the magnet. you gota find a happy medium.

[Jake_4997]

Ya i saw that piece your talking about and noticed it moved quite a bit when i moved those wheels on top, i had it working for a sec, i just held my trigger down while adjusting the toe. i'll mess with it some more and see what happens.

[layenxframe]

it just takes some playing with. if u take the grip off u can also see how the wheels affect the trigger movement. the way they kick it out or in. simply magnificent.

[Jake_4997]

ya i had the grip off and everything, i still couldn't get anything out of it, i messed with it for ever, i even copied what my big bro's angel was set at, and no luck, this is getting frustrating.

[Bigal1]

Ya i saw that piece your talking about and noticed it moved quite a bit when i moved those wheels on top, i had it working for a sec, i just held my trigger down while adjusting the toe. i'll mess with it some more and see what happens.


you may have answered my question above but I don't think I saw it.

Did you adjust the trigger in accordance with the manual? If you do, it will have you adjust both wheels and the toe adjustment screw.

In my son's case, I had to almost completely take out the toe adjustment screw and tinker with them all before I could get it to work.

But there's hope. His marker has never given me any trouble since.