IR3 airflow problem

[paintmauler]

ok so im acing my own ir3. i completely disassebled my ir3, and put it all back together now with the was and eyes. but when i air it up i get noid clicking and no firing. u kno how when u air ur angel up n u get the pshh CLICK noise. well im not getting that i just here the air turn on n thats it. anyone kno wat might be the problem?

[Vantage_TeS]

Did you take out the 14way? You probably put the gasket in backwards.

[paintmauler]

ok well i found out the problem. when they made sensi in the ir3s it interfeard with this little hole that goes from the front of the angel all the way to the back, which brings air to the noid. with sensi it block that, takes a detour down by the sensi pad, then through the sensi pad up through another hole back on track. i 1st aired it up and noticed that one hole was leaking, cuz i took the sensi pad out. i blocked that hole. and thats y i wasnt gettin air.

[nonamifrontman]

A better way to do that is to cap off those 3 holes with various size gub screws, fill the COPS rod hole with some sort of epoxy (probably JB Weld - Put a piece of tape over the hole in the breech to keep it from running) then drill out the passage so the air is going straight through the marker instead of down and around...

[paintmauler]

thnx for the input, i didnt feel like doin all that so i hooked up a tube from one hole to the other n it works fine.

[RonnyMcDYO]

Or just put the COPS/SENSI diverter back in...you dont need the rod in there just the dirverter plate