Just got G7

[a friend]

I just got my Arsenal G7, it is awsome and all but I need to know two things

- When it comes out of the box, is it ready to rip?

- sometimes when I pull the trigger fast, it doesent always make a little "snip" noise. Even though it doesent always make a noise, if it had ammo and paintballs, would it be ramping?

thanks

[El Pirata]

Read the manual a few times and your questions will be answered.

[Jasarii]

Yeah, read that thing inside out. My G7 is coming in a few days, I printed the Manual already and am trying to get ahead of the game. :cheers:

[firemedic30]

Congrats. Welcome to the club!!

I had to slightly adjust my trigger to really get it to rip. But after that, man that thing mows!!

[tgaffner]

Make sure you give the Battery a good charge. Other than that, it will rip right out of the box.

[Jasarii]

Make sure you give the Battery a good charge. Other than that, it will rip right out of the box.

yep says 4hrs at least for 1st charge...prolongs battery life. It's all good

[a friend]

thanks everyone, also, I reached my first time to lube the gun. Everything was fine until I came to the RAM. I pulled the lock pin out and did everything the manual said and the ram will not come out. It is really bugging me but I figured it would be best not to mess around with it. Anyone have any advice? :)

[thatguy!]

You probably don't need to lube it just yet.

[a friend]

well, I know that I need to only because I have shot it 8645 times (literally) and when I put in saftey it says "greasing is recommended. So I figure, "better do what it says". There fore, here I am telling you this answer.

[thatguy!]

8600 times with air/paint?

If you really want to lube it, open the breech and unscrew the Ram. If you have to, push it out from the inside using a paperclip or small screwdriver. The Ram assembly should slide right out.

[a friend]

not really, 4000 times with paint (spent 4 months of allowence that day)
thanks for the info.

[a friend]

Oh, also, my rubber grip where the buttons are has a problem, the rubber recharge flap is comming off, the rubber is actually ripping where it bends. Is there anything I can do to get it fixed

[golobulus]

that part is the TPR, if you look at the sticky, Ken should be able to hook you up with one.

[a friend]

thanks

[FATBACK]

that part is the TPR, if you look at the sticky, Ken should be able to hook you up with one.

He has the new TPR...that sticky is for earlier models with the "foam" tpr's.......my battery tab ripped loose/off also :notsure:

[Kerplunk]

I just got my Arsenal G7, it is awsome and all but I need to know two things

- When it comes out of the box, is it ready to rip?

- sometimes when I pull the trigger fast, it doesent always make a little "snip" noise. Even though it doesent always make a noise, if it had ammo and paintballs, would it be ramping?

thanks

It has a laser eye where the paintball goes and only fires when the paintball is all the way in the chamber, this keeps the gun from chopping balls. The Angel G7 is the finest marker made today. just remember this, NEVER USE CO2 or a CO2 bottle, get a 3000psi/4500PSI 68CI Tank.

[a friend]

I have a TON of problems. My gun says oil service required, and I had rocky fix up my gun BUT our tanks are different so my balls are dropping off. I tried to take out the LPR but when the fore grip was supposed to come off, it did'nt. Can anyone give me advice on the foregrip removal.

[firemedic30]

Did you get both screws. I had to go out and but a longer set of metrics for the allens. But once you get both screws out, it should come right off.(one right in front of the trigger guard and one inside the grip.) Be careful when taking the mini-reg apart not to "scrape" the internals.

[a friend]

So one of the screws is located UNDER the tpr?

[firemedic30]

There is one screw just infront of the trigger guard. The other is acutally IN the front grip. To access it, you must take the mini-reg apart.

[G7pride]

i got my g7 when it first can out adn the thing rips but it seems like the triggure can get waay smoother and more loose....i was thinking about taking the magnet out of the back wheel and seeing it it rips....any suggestions????

[Kyzer]

Mmmm maybe some leasons in typing,and we may be able to understand you alot better!!,there is a link on triggers,do a search mate... :clown: