PDA

View Full Version : which board

*silent*sniper
08-26-2005, 02:37 PM
which board is more desirable... the euro or fly??
Eclipse363
08-26-2005, 04:56 PM
i would say the fly for its LCD
hgroberts
08-28-2005, 09:48 AM
if you want just a basic board go euro if you want a read out screen go fly and rember you can't put new software on the euro
FATBACK
09-06-2005, 01:41 AM
Da fly..........i'm an lcd junkie, but i be lovin them gambler speeds.....me want one :drink:
CopperTop
09-06-2005, 02:52 AM
and the euro doesn't support intellifeed, can't get the updated software, and ONLY has semi mode, despite what the manual says...
rix123
09-06-2005, 04:53 AM
and the euro doesn't support intellifeed, can't get the updated software, and ONLY has semi mode, despite what the manual says...

...actually, the Euro does support intelli-feed thru the HOP port on the board...but you cannot set/change the ms 'duration' of the 'spin' signal like on the Fly LCD boards.
CopperTop
09-06-2005, 06:07 AM
Maybe on a "real" euro board, the ones used for the conversions don't (so I have been told)....I still even have the intellifeed rail and wiring on my gun, tried it several times and it didn't work.....then tried with a old IR3 board and it works fine. I was told that they didn't support it when I asked after getting it back from being flied.

I don't know....but, if your correct (which I hope you are) then my board has never functioned properly from day 1. Can we get a MT to confirm this?