PDA

View Full Version : speed 05 volocity problems

Kill Crazy
08-23-2005, 12:34 PM
rite guys i have a problem i have an agle speed 05 which is only 1mnth and a bit old with a 5000psi/pmi 1.1ltr btl .
But no mater how much i turn the volocity on the gun down it still fires at 295 , 310 fps .
Now i dont know id it is a problem with the marker or me bottle but i use a 3000psi/pmi btl in it its fine and fires at 270psi on a penny but with the volocity adjustment still screwed quite far in .
Im thinking it may be a problem with me gun and if so wat should i do to fix it or should some one have it inserted up there poooo pipe. :fighter:
justinberendes
08-23-2005, 12:48 PM
you are probably using an hp tank or high pressure tank. HP vs. LP means that the tanks output pressure is around 850psi instead of the recommended 450psi. Go find yourself an LP tank.
Kill Crazy
08-23-2005, 12:51 PM
ta m8y but the thing is i bought it from a shop and i would of prasumed they would of sent me the correct btl for the gun but ill try and get an LP btl or lend one off the lads to see if ti makes and difference
RonnyMcDYO
08-29-2005, 10:26 AM
You should be able to readjust the mini reg spring stack to allow for HP usage...however im not sure of the arrangment...might want to ask one of the MT's or other techs.
BonzaiFNG
09-11-2005, 02:01 PM
im running a hp tank on my speed and it sucks i ordered a lp spring kit for my pmi tank for 15$ way better than buying a whole new tank :cheers:

i love angels!!!
ray ray
09-11-2005, 02:14 PM
bonzai where did u buy the spring stack
BonzaiFNG
09-11-2005, 03:56 PM
from paintballace.com heres the link http://store.paintballace.com/puenlowprspp.html
ray ray
09-11-2005, 04:45 PM
thanks....will that work with a crossfire tank
BonzaiFNG
09-11-2005, 05:24 PM
no only for the pmi tanks with crossfire you have to get a whole new reg on the tank. go to there website and it should give you a price to send it in and have them install a new reg on it
ray ray
09-11-2005, 05:32 PM
o ok...thannks
shaq787
09-11-2005, 10:14 PM
my teammate sent his crossfire tank (hp) back to crossfire and they replaced it with the LP, i think it was cheaper than buying a new tank. its also less work on your part, and since crossfire is doin it then you'll know that it was put back together right.