problem with bps

[kuaker]

hey fox i got my g7 just 3 days ago and took it to the field and set it up in mrof 25 and the tr in 3 and using a reloaded b and even a halo b with a victory board i can't get more than 15bps in mode 1 any suggestions? the loader speed is in 8

[loonis]

move your fingures faster :notsure:

[kuaker]

move your fingures faster :notsure:

i should laugh or what?
i'm asking because i usually can get about 23 bps with any fly and even with my flyed ir3 also i used another g7 with the same setting and i could get about 21 bps

[Trigga Nometry]

I noticed that a couple G7's come stock from WDP with the MROF set to 15bps. Check that on your LCD display. I bet it is capped to 15bps. Just change it and it'll rip. This has happened to a couple people.

[leperchaun]

mabey adjust your trigger. dont know how you have it now but try that it helped me alot

[firemedic30]

Same here as leperchaun, I re-adjusted my wheels and now she purrs!

[K4S]

take out the back magnet on the wheel. After i did that my bps jumped from 15 to 25 on TR 1

[kuaker]

thanks a lot for the answer guys i'll try it tomorrow and them i'll tell you what happened>!!

[golobulus]

Same here as leperchaun, I re-adjusted my wheels and now she purrs!

how fast have you got it to shoot? mind sharing your trigger setup with a fellow arsenal owner? since taking the rear magnet out i haven't gotten to shoot it with paint so i don't know what the true bps is :notsure:

[firemedic30]

I am up to 22. It's hard for me to explain this. But, I just turned the front wheel until there was very little return foward. When I did that, I was rippin'.

[kuaker]

i took the rear magnet out and now i'm getting about 19bps but using the tr in 2 i tried another gun and managed to get 22bps with the tr in 1 and the two magnets on the gun so any guesst? also i've got the last software and i'm using the hopper speed in 16

[DarthAlan]

Your loader may not be feeding fast enough. Even with V35 set on the highest settings, if the motor is old, it will not feed too fast.

[Sung]

Atleast your getting 19bps. I can't get mine to go over 14-15bps. I tried using my halo b with cheetah board and empire reloader b. I can't get any help on mine. I'm hoping it's just a board problem.

[KEN CRANE]

Atleast your getting 19bps. I can't get mine to go over 14-15bps. I tried using my halo b with cheetah board and empire reloader b. I can't get any help on mine. I'm hoping it's just a board problem.

i was trying to help but was offended by your tone in the pms. i understand you are not a 15 year old idiot but we needed to start somewhere... maybe we should start again?

[jayr7309]

Where caN we buy the cheetah board, I'm very interested...

I can only get my gun doing 23 bps on a EMpire B
Intellifeed it went up to 28 bps..

they say the cheetah board is pretty quick

[Sung]

Sorry about that Mr. Crane. I apologize just got a little cranky cause I been messing with the darn thing for a couple days now and no go. Again, my apologies.

[KEN CRANE]

Where caN we buy the cheetah board, I'm very interested...

I can only get my gun doing 23 bps on a EMpire B
Intellifeed it went up to 28 bps..

they say the cheetah board is pretty quick

use the angry board ....

[KEN CRANE]

Sorry about that Mr. Crane. I apologize just got a little cranky cause I been messing with the darn thing for a couple days now and no go. Again, my apologies.

ill pm you my phone number tonight we will get this fixed up

[kuaker]

hey ken just a quick question i tried using another halo but it's still the same if i don't use the tr in at least 2 i can't shoot more than 17bps does it has to do with the software? mine is 1.5 using tr 1 i just get to shoot 15bps even with a new halo with angry board any tough on that>?