Air System Help Quick???

[MCBrawler]

hey guys i brought an airsystem with the belief it would work in my angel a4. its an pmi 3000psi 0.8l alminum air system 48cu HP it doesnt tell me what hp it is. Also the guy at justpaintball said it will work fine, all i need is to turn down the velocity, i was wondering is this ture if not how can i get it to work im playing this sunday at npf can some one helpme either buy telling me i can make my air system lp or something like that.

[Vantage_TeS]

You should smack the guy at justpaintball upside the head for talking you into buying a 3k HP aluminum tank.

The A4 will work on the HP system but it was designed for a LP system and will run much better on LP.

You wont get very many shots off the 3k tank, and you will find that its a heavier tank.

If you can I would take it back and get a 4.5k carbon fiber wrapped tank which is LP.

If you cant then there are things you can do to make it work it just wont work as well.

You can remove a spring from your minireg called the "minired mod" [run a search, Ken Crane explains how to do it. In fact it should be in the sticky at the top of this forum] which will help the gun handle the higher pressure.

For now you should be able to just put the tank on and it will shoot, you may notice your velocity is a bit high and it will break more paint.

To solve the paint breaking problem check and lower your LPR pressure.

[MCBrawler]

thanks loads mate but the main thing is it will work it wont destroy my gun yeh

[Klassy Guy]

No your gun will be fine, you don't even have to search, hit the back button on your browser to go to the "4" forum, and you will see "recommended angel 4 settings" by ken crane, and the mini reg mod will be there. I really recommend a carbon fiber tank (I use a mac dev leigonair and havent had a problem (I really did my research on tanks and this is the best in my mind, looks much nicer then crossfires too). I would go talk to the guy who sold you the tank and "split some wigs." The only way to destroy your gun short of soaking it in water, nuking it, etc. is to overload the noid with pressure, so don't raise your lpr too high.