New help changeing modes

[bdpAKAknox]

First of all, yes i read the manual.
It tells you how to change a mode, but fireing modes arnt mentiond.

I have 7.0 on my speed, its on PSP mode right now.
I need it to be on semi.

IF someone could walk me through wha the LEDs will look like and what-not that would be great.

Take it slow, im new to angels.
Like, " Ok first do this, the LED will look like this, then do this..." ect ect.

[wolfram075]

open frame on left side of gun, push button on bottem right of board and that sends u in to programing mode...all 6 small lights on the trigger debounce (big led=red) is psp ramp mode...1-5 is just trigger debounce in varying degrees, and semi only mode. for the mrof (max rate of fire) the top big led will =red orange green (not sure what order but it will flash all 3 colors real fast). one led will be 15bps...each additional light will add 3 bps to that up to a max of 30/1. hope this helps if not ken has a post some where (check helpful links sticky).

[bdpAKAknox]

k, push button on board
now teh 2nd from teh top LED is red.
now i............?

[wolfram075]

turn it off then back on

[wolfram075]

also if u want u can go to where the verry top led (the one thats bigger than the others ) blinks diffrent colors and that sets ur mrof one is 15 bps...each lighe past one adds 3 bps to max rof.

[wolfram075]

the biggest led tells u what mode ur in u change that by pushing the button of the board and u change the settings by hitting the trigger.

[bdpAKAknox]

Still in PSP.
i jsut need it to be in uncapped semi

[wolfram075]

ok go to chat...ill help u their

[wolfram075]

good luck with all that guy..hope it all works out for ya.

[bdpAKAknox]

Yes thank you very much.

[wolfram075]

no problem thats why this site is up...if only more people were as understanding...lo :boobies: l