sensi question

[pbking28]

hey guys wat up, heres my question
When i fist got my A4 the sensi worked great and never chopped i always kept it on semi 1.
but ever sense i adjusted the trigger it started to chop and at first i thought the sensi went bad so i tested it but it passed every time. so my next thought would be that maybe the bounce from the trigger has to do with it because my trigger settings electronicaly are at 20 wich sould be no bounce but from the way i adjusted the trigger it bounces like crazy even with TR at 20 so would the bounce be the cause of me chopping.
Thanks for the help :cheers:

[Klassy Guy]

Bounce won't make you chop, faulty sensi rod, or you turned off sensi, or if it is speed related, and you are absoulutely sure sensi is on, then It most likely is bad/horrible ram positioning.

[pbking28]

sensi is on and ram position is good, it clicks when you close the breech door

[Klassy Guy]

Dwell too low?, This doesn't seem to be a trigger related issue, since angels are electros, you can't shortstroke them, so If it is registering a trigger pull and it fires (which it does), it isn't trigger related. Mabe it is a lpr that is too high, because it was put at a normal pressure when you got it, but when it was broken in, the pressure went up, I'm all out of Ideas.

[Duper]

I'd first set it back to exactly how you had it prior to the chopping problem (adjust the trigger back to it's original position, use the same hopper, etc). If you're still chopping, then go through the troubleshooting section of the manual about chopping (one of the last pages). Check out each of those trouble points it covers first and adjust/fix anything that's wrong... If it still doesn't help, cruise back here. (BTW, make sure it's 'chopping' and not just breaking in the barrel -- is there paint all over the bolt or just inside the barrel?)

Let us know if you got it fixed or not (and what the problem was).