PDA

View Full Version : Plese Help Gun Not Shooting!!

2poor
08-01-2005, 10:23 PM
i need help my gun wont shoot and i have no dea why...its like its not pressiurizing the ream wont move i need help please thx
2poor
Vantage_TeS
08-02-2005, 06:56 PM
Need a little more information.

Will it go to safe?
Then to live?

Do you hear the 14 way click when you pull the tigger?
2poor
08-02-2005, 10:04 PM
no, no sound at all live safe? its an apollo (lcd) but has a speed board
BoB
08-03-2005, 12:11 AM
Have you done a fresh charge on the battery? Does the board recognize the trigger pulls? Have you checked all the wires and plugs? Have you tried removing the board from the frame to see if it is just a trigger adjustment issue?
2poor
08-03-2005, 11:16 AM
well the battery is charged all the way the gun was just returned from your company acctualy and the board says its shooting and but its not i got it to make a little bit of sound it was just making tiny pops that you could hardly hear but nothing else besides that....but the board works great and great work by FMA.
Eclipse363
08-03-2005, 03:08 PM
if the gun makes a clicking noise when you pull the trigger then try a different air supply, and make sure its a high pressure output.
BoB
08-03-2005, 07:09 PM
Make sure the dwell is at least 14. Do you have any way of checking the pressures?
Vantage_TeS
08-03-2005, 09:29 PM
Those tiny pops are the 14way clicking, its not loud at all.

It sounds like you are not getting air into the gun at all. Take the end plug off the valve side [left side looking at the front] and slowly screw your air tank in. Do you get a hissing? [stop and remove the air sourse after you get the start of the hissing].
2poor
08-04-2005, 10:51 AM
yes air is getting to the gun when i take the end cap off air comes out. i openend the breech and used the the bolt to move the ram forward and when it hit what ever is in there on the other side it sound like it is shooting so its like its just not moving the ram forward?
thx for all the help so far though
2poor
08-04-2005, 10:52 AM
high pressure tank i was told by a tech that you should be using low pressure
2poor
08-04-2005, 04:18 PM
Make sure the dwell is at least 14. Do you have any way of checking the pressures?




and no i have no way to check the pressure