Good Question

[ropesofpaintxxx]

ok i have a really good question to ask....

when i opend the grip on my angel a4 i seen on the board it looks like theres a open spot for something and i wanted to know if those were for eyes... if so could i just get eyes and get someone to tap the hole and be done with it ? thanks for the help

[OverweightAngel275]

Sorry, that spot is for the optional intellifeed. The spot that would only work with eyes is the spot where the sensi is plugged in now ( the green wire ). You could just plug eyes in the sensi spot, however I doubt they will function correctly because the software is different and therefor not meant to run eyes. Your best bet would be to get your gun flye'd to makesure your gun is well taken care of.

[Klassy Guy]

On mine it says sensi, sol, intelli, and the other thing (are there 4 plugs, havent checked in a while). sensi= sensi sol= solenoid, intelli= intellifeed.

[gc82000]

Basically what they said but if you do decide to try to use eyes in you A4 board it will be read as an error. If you want eyes you will need to get a fly board and body tapped so as to fit the eyes.