PDA

View Full Version : bolt sticking...?????????????????????/

ANGELFORLIFE
07-15-2005, 05:11 PM
hey,
i've tinkered with this for a long time now and can't get it so time to come here. my a4 has was/ace done to it and i'm having the problem of my bolt sticking after everyshot, the bolt can be pushed back and it'll fire again but then it'll stick again...when it fires it's accurate and chrono'd up where it should be it just sticks there. i'm wondering if it's somthing simple like my battery, (don't currently have any 9volts i will later though) or if it's a problem with my internals, i checked my bolt and that is fine it's not swollen or anything, i cleaned and lovejuiced my gun and all that, i checked all the macroline fittings to make sure there's no jam or anything like that, my dwell and settings are all good...i don't know.

any thoughts?!?!

thanks.

**and i have a 68/4500 crossfire LP tank hooked up and my gauge is about 180 psi on my reg, i have a large volumizer.**

*it sticks when it's dry-fired and with paint.*
Presto333
07-15-2005, 05:53 PM
i;m having the same problem with my speed, my problem was that my breach was somehow mis-aligned, take the barrel off and look down the breach (degas ur gun and turn it off first) and see if the bolt looks like it's not aligned right. Also wut is ur lpr and dwell at?
ANGELFORLIFE
07-15-2005, 05:58 PM
my dwell is at 13 and i don't know about my lpr...
ANGELFORLIFE
07-15-2005, 06:11 PM
also does anybody know if it would be a ram adjustment?...
Klassy Guy
07-16-2005, 02:23 PM
No I don't think It would be ram, if he can open the breech then it isn't the ram, alignment sounds right. If it isn't the alignment then it might be a faulty solenoid, the noid lets the ram go foreward, but not back.
ANGELFORLIFE
07-16-2005, 04:08 PM
well yes i can open the breech so it's not the ram.
IF it is alignment how do i fix that?

and oculd it be my LPR? i don't have a angel tool kit to change it but my friend does and i'll see him on sunday were gonna tinker with it then...
Presto333
07-16-2005, 04:35 PM
if it's alignment of the breach, ur breach + rubber hammer = solution
ANGELFORLIFE
07-16-2005, 04:39 PM
the breech seems perfectly aligned to me, i think it the lpr...

the breech is aligned perfectly...
ANGELFORLIFE
07-18-2005, 02:12 PM
it was a assload of problems, we got it.

thanks anywho.
LayinRocker
07-21-2005, 06:41 PM
good to know that you fixed it. Post what was causing the problem as well as how you fixed it just in case any other users run into this problem.