low rise feed neck

[tsutton838]

looking for sites that i can find a nice chrome feed neck for my angel, also once i get it do i lock tight it in?

[Zeroack]

I run a ccm mid rise on mine. I know ccm offers clear as a color but not chrome. Also you won't want to locktite the neck if if you get a lowrise cause you won't be able to open your breach. I do know a few people that run lowpro's from ccm and just screw them off when they need to get the breach open. I've been playing with milling out a ccm lowpro so my breach opens. Speaking of that...think I'll order one. Thanks for reminding me.

Zero

[three fut nuthin]

all of the sponsors carry Angel feed necks i believe. www.angelparts.com

[tsutton838]

so the lowrise are too short to allow the breech to open eh, but mid rises work pretty well? cause right now im shootin stock and my hopper sits rediculously high, and i really wanna find a chrome one to slap on.

[bigfootimp]

I recommend the fly feedneck. Never had any problems with it at all. Some other company makes a quick flip feed neck that you can adjust he tension with an allen wrench and then flip a lever to easily and quickly remove the hopper but I am not sure about who makes it or if it allows the breech to open.

[three fut nuthin]

that owuld be the gated feed.

[tsutton838]

alright so i found a feed neck that matches the color of my gun which is awesome so does any one know if this will get in the way of the breech?

http://store.paintballace.com/ansufitfenel.html

[Zeroack]

That looks to be high enough. Most people will tell you if it won't work on a certian marker. Like CCM...they tell you the lowpro or lowrise won't work on angel's due to the breach.

Zero

[paintball freakster]

i have a check it mid rise on mine and my breach opens (VERY close tho). its one feedneck i havnt had a problem with yet. id say its a good choice.

[three fut nuthin]

no, it wont. note on the picture it looks like it can clear.

[JawCrusher]

Sorry for reviving such an old thread. I used the search command and didn't find any good information (especially in this thread) about a solid answer on a good low rise feedneck. I ended up buying a Check It Sure Fit low rise feed neck and it works great w/out blocking the breach from opening. Sits your hopper fairly low and has a clamping neck (using a bolt). Anyways, just thought I'd put in my .02 in case anyone goes searching for low rises on an LCD. I've had my fair share of problems with various low rise feed necks on my LCD so I hope this helps.

Oh, Absolute Sports (paintballgateway.com) seems to own Check It products.

[JawCrusher]

A few pics...

You'll notice how tight the fit is in the second picture. Check It did an excellent job getting the lowest possible feedneck to work with the LCD...

http://i10.photobucket.com/albums/a112/Phunkadilic/Angel/fneck1.jpg
http://i10.photobucket.com/albums/a112/Phunkadilic/Angel/fneck2.jpg
http://i10.photobucket.com/albums/a112/Phunkadilic/Angel/fneck_profile.jpg