My a4 is a piece of junk

[jaykuhl]

ok man were do i start. first off my gun leaks from the little square hole at the top of the minireg housing (the thing that holds the minireg on). i have oiled about 10 million things not oiled them, replaced o-rings and what not,and turned down the pressure on my mini reg but no it still wont stop. nextly my board has gone to hell, when i go to charge it, it will charge for like 30 sec. then just stay on. and i know its not my charger cuz my brother uses it on his angel. and even when there is little to none battery after pluging in the charger (it does as fore -mentioned), it well display it has a full battery.

so if anyone can tell whats wrong and maybe help cuz there is no way i am going to waste more money on this p.o.s. of a gun. :pisss:

oh yea i remembered more, my sensi is §§§§oki, i dont know what idiot thought that was a good invention, but my halo completly annihlates sensi. it is broken cuz the halo is too beastly for it, and even when i get new sensi rods it still doenst do crap. even when it was brand new it always sucked. even with other hoppers and different sensi modes IT STILL SUCKS.

[Talon]

Call an MT and explain your woes...they will get you all sorted out.

[angelover]

Yes....What square hole are you talking about exactly? Also the A4 is not a P.O.S.

[gc82000]

send your gun to me and i will take good care of it., what color is it.
Oh yeah check to see if your oring is in the chanel between the ASA and the body, that is the only thing that I can see that will cause a leak.

[Clipkid243]

eh, had the same problem wiht my speed. it was a bad oring on the lpr.

[Vantage_TeS]

That square hole is your LPR vent. Like Clipkid said its your LPR.

As for halos and sensi, sand your rod a tad so its a lil shorter. This will keep the halo from popping your pads [make sure your pad is not broken right now].

Also make sure you are calibrating sensi when you turn your gun on.

www.wdp.tv/manuals

[KEN CRANE]

ok man were do i start. first off my gun leaks from the little square hole at the top of the minireg housing (the thing that holds the minireg on). i have oiled about 10 million things not oiled them, replaced o-rings and what not,and turned down the pressure on my mini reg but no it still wont stop. nextly my board has gone to hell, when i go to charge it, it will charge for like 30 sec. then just stay on. and i know its not my charger cuz my brother uses it on his angel. and even when there is little to none battery after pluging in the charger (it does as fore -mentioned), it well display it has a full battery.

so if anyone can tell whats wrong and maybe help cuz there is no way i am going to waste more money on this p.o.s. of a gun. :pisss:

oh yea i remembered more, my sensi is §§§§oki, i dont know what idiot thought that was a good invention, but my halo completly annihlates sensi. it is broken cuz the halo is too beastly for it, and even when i get new sensi rods it still doenst do crap. even when it was brand new it always sucked. even with other hoppers and different sensi modes IT STILL SUCKS.

well we dont like you either. i wont even justify helping you. maybe being a little nicer might get you someone to help.....

[Paintballjc]

If its really that bad, id be more than happy to take if off your hands and give it a good home.

[lefty21]

I guess I can see where he's commin from, you pay a pretty penny for, what everbody knows, is one of THE BEST MARKERS EVER and it doesn't work....What you're not takin into consideration is that such fine machines MUST be finely tuned and taken care of WHEREUPON it will work magic...lol lol lol

Nah seriously, take care of it and it will work like its supposed to...AND it seems you may have offended some people, so you might wanna refine your statement.

[jaykuhl]

k sry for offending anyone, i was just mad when i wrote that cuz i was goin to go yesterday and play but my gun wasnt charged cuz of the fore mentioned problem. so i couldnt play with it.

[Talon]

Calm down, explain each individual problem, and we can get you sorted out. Going on a tyraid and slamming the marker that we all swear by isn't going to get your marker fixed and will probably piss us off to the point of not wanting to help you at all.

In regards to the posts above, take your LPR out and switch out the O-rings and see if that takes care of your vent leak at the top of the flash tank. Also sand down your SENSI rod and glue a small o-ring in place under the sensor in the SENSI housing, there is a write up on how to do it around here some where just do a search, and see what happens.

If you're not up and running, come back and let us know what happened or didn't happen and we can try some other stuff out.

FYI...don't piss off Ken or any of the other MTs that devote so much time and work to our markers and this website. Without them, we'd all have to resort to like PBN and stuff and nobody wants that.

:cheers:

[gc82000]

Calm down, FYI...don't piss off Ken or any of the other MTs that devote so much time and work to our markers and this website. Without them, we'd all have to resort to like PBN and stuff and nobody wants that.

:cheers:

QFT Could not have said it any better

[lefty21]

QFT Could not have said it any better

QFT????? :notsure: :notsure: Sorry.

[Furby]

Quoted For Truth

[lefty21]

I'm the freakin worst with these acrynyms....Thanks :puzzled:

[KEN CRANE]

k sry for offending anyone, i was just mad when i wrote that cuz i was goin to go yesterday and play but my gun wasnt charged cuz of the fore mentioned problem. so i couldnt play with it.


ok then brother aog member state your case we will be glad to help. explain as best you can

[paintmauler]

im not tryin to be a jerk but i hav to agree on that whole sensi deal....usually problems u hav with angels is user error. i kno since i had an old sped befor...that board went to hell and sensi would never work right no matter wat i did...especially considering i had to calibrate each time i turned it on and there was no safe mode so i had to keep turning it off n back on n recali befor each game...i dotn hav that kinda time...but now that angels hav eyes i dotn hav to tinker or worry. they r straight up mowing machines. i couldnt be happier!! :drink:

[Talon]

I never really saw why calibrating SENSI was such a big deal. On the other hand, when in the box ready to start I always fire off like 8-10 shots any way.

[Angel4boy]

when i had a flash tank leak i took a small amount of grease and rubbed it on the flash tank o ring ,...that stopped all problems..

[snakepower]

I had the same problem with my a4 (leak from square hole) right when I bought it. Took every thing apart and lubed . Didn't help. Sent to the Master Ken and he replace thr lpr whole unit and that was it . Under warranty also. Still having trouble achieving high rates of fire. jim

[Dragonsprayer]

pull out the LPR and grease the crap out of it and replace --last night it took me 4 tries to get mine to stop leaking. My IR3 only did that once in the feild big blob of grease cam out the vent hole its just matter of getting a good seal. It took me 4 tries and alot of grease!

[Dragonsprayer]

Replace the o-ring too it cant hurt!

[Dragonsprayer]

lastly since its so junky i offer you $200 un seen!