a4 chopping need help

[lofas]

my angel 4 at the tourny pissed me off. It wasnt my fav paint but it kept on chopping. I turned the sensi on... usually i dont need to but i kept on choping. what should i do, i must have broke 10-20 per hopper i check my halo and put new batteries in that wasnt the problem ... tell me wat i should change thanx

[sk8boardereman]

did u calibrate? did u do a drop test to make sure the sensi even worked? was the paint breaking in the barrel or breach? lots of things can have an effect on paint.

[i am angel]

it probably was the paint i had a halo and set the max rate of fire to 15 and still broke balls. the paint was already broken and when the bolt hit it the bolt got stuck foward it was not a chop because there was no paint anywere in the feed neck but everywere else

[lefty21]

it probably was the paint i had a halo and set the max rate of fire to 15 and still broke balls. the paint was already broken and when the bolt hit it the bolt got stuck foward it was not a chop because there was no paint anywere in the feed neck but everywere else

yea...do you normally have problems with your halo? I read somewhere that the halo and sensi rod are a bad mix...

[Duper]

Here's a recent thread I started on a chopping problem I had and what I did to fix it: http://www.angel-owners.com/showthread.php?t=43114

Hope that helps.

Check the paint, calibrate your sensi before you start playing (turn your marker on, shoot 10 times WITH paint), adjust your ram if you don't hear the click, check marker internal pressures, dwell, do more searches on these forums for chopping problems (there's plenty).

good luck, let us know what you find out the problem to be.