Big Problem!!!!!!!

[Studmuffin]

okay my mode 4 is full auto. i need to know why its doing this and how to fix it. i really need help asap b/c cfoa is this weekend....any help from the MT's would be great. thanks...

[Jethro]

okay my mode 4 is full auto. i need to know why its doing this and how to fix it. i really need help asap b/c cfoa is this weekend....any help from the MT's would be great. thanks...

If you are playing cfoa, switch to mode 1 , set TR @ 1, and set MROF @ 15.

-Walter

[Studmuffin]

still full-auto...anyone know what the deal is?!?!

[fzylogic]

did you make sure it's really full auto and you just don't have your trigger contact point set too far back so it's bouncing?

[Studmuffin]

yeah its full auto. it starts out slow then goes up to 15bps. but i can't walk it past like 3bps.

[El Pirata]

Are you sure you are in mode 1? You have removed the grip panel and set to mode 1 using the yellow and blue button on the board? If you have done this, and set your tr to 1 then it is possible you have a bad board or your trigger is set way way to soft/short.

[Studmuffin]

so for cfoa mode its mode 1 and tr 1? i thought it was mode 4 for cfoa.

oh yeah i messed with the trigger on quite a few different settings and it still didnt work. all my other modes work, its just mode 4(the one i need the most) thats giving me the problem.

[snoop]

If you are playing cfoa, switch to mode 1 , set TR @ 1, and set MROF @ 15.
- Walter

did u try that and its still full auto?

[El Pirata]

so for cfoa mode its mode 1 and tr 1? i thought it was mode 4 for cfoa.

oh yeah i messed with the trigger on quite a few different settings and it still didnt work. all my other modes work, its just mode 4(the one i need the most) thats giving me the problem.There is no cfoa mode specifically for the G-7. As it had been said you need to switch to mode 1, tr 1 and set your mrof to 15.

[Sparco]

Mode 4 in the manual states that it is specifically designed for non-ramping, preset 15bps. It's not called "CFOA mode" but that's clearly what's its designed to do. After reading your post (and before posting myself) I tried to recreate your problem and determined two options:

Mode 4: With eyes on & off it was capped at 15bps, I set the MROF to 15bps just in case. No full-auto resulted, the chrono never read greater than 15bps.

Mode 1: MROF set to 15bps, TR set to 1. No full-auto resulted, the chrono never read greater than 15bps.

If you're still getting full-auto issues it's either a TR issue, a trigger post travel issue or a board malfunction.

[Studmuffin]

yeah the mode 1 tr1 capped it at 15bps, but my mode 4 is still full auto no matter what setting its on. thanks for the help everyone i really aprieciate it. Wish my team and i luck(good preferably) this weekend!

-Kyle

[snoop]

ok ok lol cuz it would suck major ass if u couldn't play the tournament

id try taking ur board into an MT .. so it can be reflashed or fixed if somethings wrong

[Studmuffin]

are they're going to be anyone selling the new tpr's at the cfoa?? if so that'd be great! but if not then i guess i'll have to keep hastling ken lol.

[ludo]

My software is the 91.4 and the mode4 is also fullauto...

I think if you cap the mode1 at 15bps it'll be fine.

I think It's not a problem with your board. Could you check you software version?

[Studmuffin]

yeah i've got the 91.4 software. this isnt my gun it's my dads. im just using it until i get my g7. mode 1 and capping it at 15bps worked. i had my tr at 16 so it ramped a little. almost thought of getting a hybrid shocker but i can't shoot my pack with a 45/45 so im sticking with the G7.