View Full Version : big problem
burn9534
06-07-2005, 09:54 PM
the ther day i was messing around with my g-7 when suddenly, the it started to leak out of the barrel, i mean a big leak,then the bolt is stuck forward when it is under pressure,can anyone help,or know where i can get help over the phone,cause th nearest angel tech is a 3 hour drive,without traffic
Bruce
06-08-2005, 12:41 AM
Take your squegee and push the bolt back until you hear a click. this should stop the leak and seat your bolt in the right position. Often happens when your air is low in your bottle.
burn9534
06-08-2005, 10:43 AM
well i went home and tried it,it seemed to work thanks alot, iguess it doesn't seem like a big problem, but then any problem with a 1400 dollar gun is a big one to me. i'm going to play tonight so i hope everything works out
Dreadwolfe
06-08-2005, 12:26 PM
Had this problem with my 1st G7 everytime I air'd it up. It would throw the bolt forward, and just blow air through the marker. The exhaust valve is most likely sticking open, that's what mine was doing, but only on the initial air up. To fix this I always hold the bolt with my finger down the feed neck when I air it up. Also, make sure the end caps(the ones that cover the exhaust valve and lpr in the front) aren't tighten'd all the way down. I like to make them almost flush with the body. It seem'd, at least on my G7, that the exhaust valve would stick more the tighter the cap was.
Aceman
06-10-2005, 04:39 AM
My G7 fires one shot with low velocity when I turn on the air, regardless if the marker is turned on or not. No big deal as long I'm aware of it...
I experienced that it could happen when your dwell is too short and your lpr is set too low.
If it happens when your are playing, try to bang the rear of your air system. The impulsion should be sufficient to unblock the bolt and the valve...
I hope it helps you!
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.