activation point?

[Minnesota Balla]

I am having seriouse problems getting an early to mid activation point. I have tryed adjusting the vernier wheels and the toe adjustment and still no luck. How would i get an early activation point? I am very sorry for the noobish question. I have never had this problem though. Thanks for the help.

[rix123]

...try this procedure:

1.) Set v-wheels to allow total travel of the trigger you desire.
2.) Back TOE screw outward so that when trigger is pulled it will not activate OPTO board.
3.) Holding trigger in (or only to the point you want it to activate at), SLOWLY adjust TOE screw inwards unitl it activates OPTO.
4.) Test, adjust as necessary.

..advice: If you want the trigger to activate at a certain point, block the back of the trigger with something so it doesn't go beyond that point while you are adjusting the TOE screw. Also, ensure that when yu let go of the trigger you have enough movemnet of it returning forward to reset the OPTO...

[Minnesota Balla]

thank you it was a great help. Got it almost perfect now.