PDA

View Full Version : Intellifeed for egg 2?

xxxspawnxxx
05-31-2005, 08:00 PM
I was wondering how to do the intellifeed thing to an egg 2..and also wher can u get the intellifeed wire?
thnkz SpAwN
welted
05-31-2005, 08:59 PM
you can get the intellifeed wire at the MT sites, listed in the top right corner of the page. also there's an intellifeed thread in the "Loaders/AirSystems/Barrels" forum...
welted
05-31-2005, 09:29 PM
the speed uses the same intellifeed rail as an ir3
xxxspawnxxx
06-01-2005, 04:32 AM
do u have to get the rail? or what do u have to do? im kinda new with this sort of stuff on angels
welted
06-01-2005, 01:41 PM
well, there's a wire that goes from the bottom of the rail, down through the gun body and plugs into the board, and there's also a thicker black wire that plugs into the top of the rail that you then solder to the leads of the hopper motor.
http://secure.fixmyangel.com/modules/catalog/images/210100760.jpg

i guess you don't necessarily need the rail, if you picked up the little board plug part at like radio shack, then you could just drill a little hole in the existing plate and run a wire to the hopper motor.
Clipkid243
06-01-2005, 05:56 PM
its a good ideal to get the rail though, makes everything look nicer and gives you something to plug into with a thicker gauge wire. if you need detailed photos, instructions, and a vid or two, pm me.
lightemup183
06-01-2005, 06:20 PM
im gonna buy this intellifeed kit, it does work on the speed board right? and i wont need hopper batteries anymore?
Clipkid243
06-01-2005, 06:25 PM
itll work on the speed board, but you do need batteries for your hopper. the speed batt is a 3v, the older lcd and ir3 batts were 6v. the hopper would be too much of a drain on the speed battery.
welted
06-01-2005, 06:27 PM
the speed battery is 4.8v... and i think there is a way to run it off of the egg's batteries but it's a tad more complicated, and i haven't really looked into it.
lightemup183
06-01-2005, 11:35 PM
oh im not usin an egg for mine, im puttin it on my ERb
Raffles
06-08-2005, 04:18 PM
WS Iron Cross Detents(2nd pair for sale, $30 shipped via USPS) <--- you willing to ship those to the UK (if they are silver)?

(sorry to be off-topic)
welted
06-08-2005, 04:29 PM
try a PM, they work better...
lightemup183
06-08-2005, 05:46 PM
sry they're black, but i would ship them to the uk but id have to up the price a bit since shipping wouldnt be cheap
Raffles
06-11-2005, 06:15 AM
Welted - true - sorry :(

lightemup183 - I'm only after silver - but thanks anyway.

Right, I'm off to slap myself around the head...