Ram Stroke

[JimmerJammer]

I was wondering this I got my new fly ir3 today and wanted to know about the ram stroke, when i shut my breech it doesnt click so i have to adjust it. Do i need to make it more towards the front the front of the hamer groove or the back of the hammer groove?

[acoenfam1]

JGruber's right!! If it ain't broke don't fix it. Put some paint through it before you start messing around with it.

[JimmerJammer]

I kno wut im doing and the ram stroke is not set right , this is my 5th angel, im used to LCD's but ppl are tellin me ir3's are different and that you adjust the ram stoke in a diferent manner, so im making sure that you still want it to click at the front of the groove of the ram.

[acoenfam1]

Long as you know what you're doin' man. But yes it's supposed to click shut.

[GOD jr.]

You turn the ram clockwise, so that means the pin would push against the back of the ram.

[JimmerJammer]

yes thats wut the manual says, but on all my LCD it was set up to the front of the ram when it got back form the angel guy.

[acoenfam1]

Interesting?? Might be worth giving the Angel Guy a call to check.

[GOD jr.]

You have it aired up right?

[acoenfam1]

I thought you were supposed to have the gun degassed when you adjusted the Ram?

[GOD jr.]

Nope, your suppose to have it gassed up, it doesn't matter if it clicks or not when it isn't aired, as long as it does when it is aired up.

[JimmerJammer]

ok i aired it up and it doesnt click, so i should get some circlip pliers and turn it clockwise until it cliks when i close the breech?

[IanR]

yes you want a slight resistence/ aka click

[GOD jr.]

Also make sure your last adjustment is allways clockwise, it you go too far and have to back it off, go a little further and then back clockwise again.