View Full Version : shoot fast!!!!
Franks
05-30-2005, 05:15 PM
how can i make my speed shoot very fast, the fastest it can go...i gota magnet trigger on my speed and without the air i can max it out but when i shoot with air and balls i seem to shoot slower, what can i do, should i set the modes and stuff, if so what should it be on????(details)
maybe a lower dwell, that may be why your shooting slower with air,well turn your mrof all the way up, and put it to sensi mode 2, also you should do the rubber band mod ,it makes your gun bounce like crazy, so you will definitly shoot alot faster with ease
welted
05-30-2005, 07:37 PM
use the faster sensi modes: 1 or 2... (keeping in mind that mrof does nothing with sensi on)... also, practice shooting with air. the gun/trigger has a different feel when it's actually kicking and firing with air than it does when you're just "clicking" without air. you may need to get used to this before you can find your true potential and max it out as you can without air.
Franks
05-30-2005, 08:51 PM
so should i disable my sensi and keep it on mode 2???? also what number should i keep the dwell on????
welted
05-30-2005, 11:24 PM
uh, the mode only pertains to when sensi is on. if you have sensi off, then it doesn't matter what mode you're sensi is set to. When sensi is off your MROF is whatever you have set.
Franks
05-31-2005, 11:23 AM
what about the dwell what should that be set to???
welted
05-31-2005, 01:03 PM
i run mine at 15 (two orange leds), though most people run theirs lower, like 11-13. i've never had a problem, so i see no reason to change.
Franks
05-31-2005, 08:30 PM
dont u shoot alot faster with the dwell low like at 10??? and the manual says "shorter dwell uses less gas and reduces noise, but is less tolerant of poor quality paint..." what does that exactally mean???
welted
05-31-2005, 08:58 PM
with a lower dwell, the gun will use a smaller volume of air per shot, thus the Operating Pressure must be higher to get adequate velocity. This is why it is less tolerant of poor paint, the initial burst of air to the ball will be more harsh because of the increased pressure.
Mike Smith
06-02-2005, 03:15 AM
Another important factor to consider is your loader. I may just be inattentive, but I haven't noticed any mention of what you're using. To get the fullest level of performance out of your angel, I'd recommend either a Evolution2 with Z board, or a Halo. If you already have one of those loaders, it will come down to the smaller details; fresh batteries/charge in everything, proper setup and tuning.
DNIMLIVE
06-02-2005, 02:20 PM
What Does Sensi Do For The Gun?
Paintballjc
06-02-2005, 03:36 PM
What Does Sensi Do For The Gun?
It is supposed to detect if a ball is in the gun or not. If there is no ball, then its not supposed to fire. Its like an Eye, but not as fast, or as good.
Franks
06-02-2005, 04:14 PM
yeah i've been thinking of getting eyes for my gun, and i use a halo on my angel.....
DNIMLIVE
06-02-2005, 07:44 PM
And The Bas
Neckbeard
06-02-2005, 09:48 PM
And The Bas
what?
DNIMLIVE
06-03-2005, 12:10 PM
Nevermind?
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.