Low pressure?

[ilovemyir3]

I just bought a G7 and I need to know if im gonna need a low pressure tank to use this thing.

[El Pirata]

Yes, it is recommended to use.

[dark_storm]

I took a little break from ballin' to keep a head up in school. I've totally lost track of everything. I need to find out what this G7 is...

[El Pirata]

Try browsing a couple of the threads, you'll figure out what it is.

[dark_storm]

Yeah, I just checked in out on the WDP site. Looks pretty badass.

[ilovemyir3]

so what would happen if I used a high pressure tank in it, if i turned my velocity screw down low enough, would it be safe to use?

[Jetwing@Impactpaintball]

the problem with HP on these newer LP guns is that you may not be able to get below 300fps. most people solve this issue by doin a "minireg mod" but it is still recommended you use LP on a g7

[El Pirata]

the problem with HP on these newer LP guns is that you may not be able to get below 300fps. most people solve this issue by doin a "minireg mod" but it is still recommended you use LP on a g7That's what the general concensus will be here.

You can do the reg mod if you only have hp tank. However, the way I see it, you've just forked out almost $1500 for a marker that requires $50 a case of paint say per weekend you play, why skimp on a tank and use your old tank for your automag instead of buying a new tank.

[coldzero]

I dunno hey, I've been using a HP tank and had no problems. I just took out a few shims and it worked sweet. My recharge rate at the LP was much better than guys using angel air. LP is "safer" but i've not had a single problem and been using it since the launch.

[ITO]

The manual says you can use HP but LP is optimal.

[sharps990]

The manual says you can use HP but LP is optimal.

a perfect example of RTM

come on its not that hard to do

sharps

[fzylogic]

It'll work just fine. I was running a HP tank on my G7 for a bit without a single issue.