I'm new with Angels and I need a little help

[Kyle Champ]

I just bought a brand new Angel speed 5. I got it in the mail today. When I started playing around with it I noticed there was no place to screw in the c02. It came with a piece of mirco line that goes into the bottom of the Expansion chamber. And on the other end it has a piece of medel. All I was wondering is what do I need to buy so I can play. I think I know what I need but im not Positive and I dont want to buy something that I would have no use for!


"Check It Products Uni-Mount On/Off ASA" Would that be what I need? If not can someone tell me what I need and posibable post a link. Please and thanks for the help!

[RPMPIRE]

The Check it unimount is just one thing that can fit your needs. I personally use it and it works for me. But you said to screw in your CO2. NEVER EVER use co2 on an angel. NEVER! get yourself a compressed air tank. and by the way, its not called an expansion chamber, its called an inline regulator. Expansion chamber is only for co2, which you should NEVER use on your angel. Don't even attempt to screw that in.

[Kyle Champ]

Yes, I have a 68/4500 compressed air tank/nitro! I didnt mean to say c02. Its just that all the other guns I have owned has used c02 (spyder, tippman, ect)!

[RPMPIRE]

alright...then all you need is a unimount and you're ready to go.

[Kyle Champ]

Well now I have another question. I seen people talking about low presser and High presser tanks. All I know is that mine is a 68/4500 Compressed Air tank. I dont know if its low or high! How can I tell?

And If I were to put a HP tank in the gun would it mess it up really bad?

[RiceSolja]

Well now I have another question. I seen people talking about low presser and High presser tanks. All I know is that mine is a 68/4500 Compressed Air tank. I dont know if its low or high! How can I tell?

And If I were to put a HP tank in the gun would it mess it up really bad?


doesnt matter just use whatever tank u have...High pressure or low pressure output tanks dont matter..

i use high pressure tank

[Kyle Champ]

Ok thanks, I just found out that the tank I bought was HP and I spent like $205 on it and I didint want to spend another $200 on Another tank. I was sweating bullets there for a little bit.

[Kyle Champ]

How about this asa? would this work for an Angel Speed 05? its a Shocktech Drop Forward/ASA Combo 1 Drop Forward - Black


http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=X1D5OLprCwb58fj87EM5kLCi-hBM5CFpMcM=?ProductID=_YLAqArb59oAAAEAh0Ohw76P

[angel4life05]

I've only used low pressure tank's!! good luck

[RPMPIRE]

that works too. as for the HP/LP thing. they say you can use both, but wdp recommends a low pressure tank. There are some threads around here about lp and hp tank. I'm thinking that you got a pure energy tank. They sell a lp stack that you can put on your tank's reg to make it low pressure.

http://store.paintballace.com/puenlowprspp.html

its really cheap too.

[Kyle Champ]

Yeah, Its a pure energy tank. So that thing will make my tank do Low pressure? thats really cool, I will get it asap, thanks a lot man.