Angel 4 Fly Problem

[raptorx]

Well I finally was able to get my Fly out for a day of play about 2 weeks ago but I ran into a problem while trying to chrono. No matter how high I set the velocity, my shots would just drop out about 2 feet and thats it.

Its a brand new Angel 4 Fly set at the recommended setting from these forums. I'm using a NitroDuck X-Stream set to about 450psi output.

Anyone know what the problem could be?

Thanks for looking.

[bigfootimp]

Kind of sounds like it could be either a dwell or lpr problem. Try to increase our dwell but also if you know someone with an angel tool kit check your lpr pressure. It should be between 55 and 65 psi. Hope this helps