bounce problem

[*I*A*]

Ok Ken i wet out and shot my gun today and it was CRAZY but one prob it was bouncing like crazy i would take my fngers of the trigger and it was still shootig. it only did it when i put paint through it. when i would dry fire it was fine. and it also had a shoot down issue but i think i can fix that. just need your info about the crazy bounce. thanks

[Who?]

Whats your TR at?? Prolly just a matter of dropping the TR to 1...

[connor07]

Best thing to do is drop down your TR, if that doesn't work adjust your trigger.

[KEN CRANE]

turn the trigger setting down to 1 or 2 lights. that will stop the ramping.

[salmanilla2000]

I have the same problem. I think I fixed the bouncing, but I have first shot drop off. How do you fix that?

[BAKERmancan]

I've only seen or heard of that 1st shot drop off in the newer shockers because the stock reg that comes on it is crap. Changed the reg it worked fine.

But i doubt your reg has any problems if its a new gun...

If ONLY the 1st shot of every string of shots shoots down your tank output pressure might be fluctuating while you play (if its adjustable output tank) cuz i see this happen a lot.

It also could be a LPR issue since that's what sends air to the solenoid for your 1st shot and maybe somehow when you let your gun rest that stored air somehow leaks out for the 1st shot before it recharges and i've also seen that happen but never in an angel...

See if the LPR needs shims,check the in-line reg to make sure it's clean, maybe put a couple drops of love juice in it,other than that i can't think of why ANY angel would have 1st shot drop off...i thought that was just a shocker thing :S

[KEN CRANE]

I have the same problem. I think I fixed the bouncing, but I have first shot drop off. How do you fix that?
low battery voltage and a low lpr can cause this issue. also run a little love oil thru the gun that might help reduce the stiction.