problems with trigger pin guard

[Dynasty18]

ok the guard for the trigger pin requires an allen key...but the head has been shreaded on the guard.

how on earth can get into my trigger to clean it aswell as the pin???

cheers
Matt

[welted]

you mean the little set screw that holds the pin in? that's a tough one if you strip that out. try a slightly bigger allen wrench. you could also try some superglue on the tip of the wrench, set it in the screw, let it dry then see if you can get it to hold enough so you can unscrew it.

[Raffles]

...or drill it out - slowly!

[Vantage_TeS]

Torx bits are your best friend. They are the ones that look like this *