Help with chops and Cops 2,I did a search!!!

[Paul99]

I hope someone here can help,I used the search function and didnt find a relevant answer.
I was breaking a lot of paint at the weekend,I just took everything apart and cleaned it all.I had a lot of paint on the Cops rod and the black plastic "holder".
I also noticed that the rod was bent,I changed that for a new one.
I have cops 2,I looked in the manual and at the update for cops2,I performed a drop test and didnt get a result...
Might be a very dumb question,im not sure if Im doing the test right?
According to the manual I should push the blue button on the board and drop a ball in,if the test works,I get "passed" on the display.
I tried that,didnt get the "pass".
I also tried dropping the ball in and then pressing the blue button,again no "pass".
Am I doing the test right?
The update for the manual isnt too clear on how to perform the test with "TCOPS",only for the older board.
Im pretty sure my cops is causing the chopping,I had a good paint match,(Freak set),im using a revy on intellifeed,the ball detent is good.
Settings are;
Dwell 14
MROF 13
SENS 12
BAS 20
The only thing Ive changed is the trigger,I now use a Cobra Flat trigger and thats when my problems started,Im now shooting faster.
Any help would be GREATLY APPRECIATED,thanks in advance!

[acoenfam1]

And if you don't get a "PASSED" indication adjust the COPS Sens accordingly.

[Paul99]

J.GRUBER AND ACOENFAM.
Thanks for your help,it passed every time!
Ive read through the manual again and didnt find a reference to the Green button anywhere,(page 21).all that the pics show is a finger on the yellow button,then the blue button,no fingers on the "green".
Im happy you could help,and that very quickly,Id buy you both a beer if you werent on another Continent!!

[acoenfam1]

GTG gald we help.

[Paul99]

Yep,please close the thread,maybe I was getting confused because of the languge barrier,who knows,see you on "Millenium"????