having shoot down problems

[paintballho44]

My problem is when I get on the trigger ,after the 7th or 8th I get a blurp sound and the ball falls really short and then it goes back to normal then after the 7th or 8th shot it does it again. It only happens when I hammer on the trigger. I have Angel AIR and I'm running 566 into the gun and shooting around 260 fps. Was wondering if anyone could HELP ME out....

[WarpedKid02]

What is your LPR Pressure set at? Is it recharging fast enough? You might want to check your Snap Ring as well.

[paintballho44]

I don't have a tool kit is there any other way to check it and what should it be at ?
I just put a new R11 Bolt in it could that have something to do with it ?
How do I tell if I'm recharging fast enough?
Yesterday was the first time it has done it . Thanks for the reply..

[Emmit]

shootdown is directly related to your LPR pressure. Chances are you've finally shot enough paint through your new IR3 to have worked all the initial grease etc out, consequently your LPR is now low. You need to get ahold of an LPR guage and test it out. See where your LPR is set first, and then see whether or not your LPR is recharging properly when you're firing the marker.

[paintballho44]

Emmit...Thank you very much for your help.
Warpedkid....thank you to,for your help.
Can you please tell me what my LPR should be at?

[WarpedKid02]

For the iR3 the LPR should be from about 95-100psi.

[C]-[iLDe]

i personally wont run my iR3's LPRs below 100psi.

[captncrunch]

Yeah it's the lpr, that happens to me on my cocker all the time, I won't notice the pressure is too low, and I'll get on the field and fan the trigger and it burps and I have seven or eight balls go 25 feet.